ok.. first of all, echolink protocol requires a one-on-one correspondence between node number
and public IP address. The "multiple instance" architecture of chan_echolink is only for systems
that have multiple public IP addresses on them.
Secondly, *all* outbound connections from app_rpt originate from el0.
JIM WB6NIL
Date: Sun, 31 Jul 2011 11:34:10 -0500
From: kd0eav@gmail.com
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] Multiple Echolink Nodes
Does anybody have multiple Echolink channels running on the same
machine??
I've defined both nodes in echolink.conf as [el0] and [el1] ... both
of them register and show up in Echolink; but EVERY outbound
connection originates from [el0] .... [el0] should be attached to
node 27097 and [el1] should be attached to 27521; but when I to try
establish an outbound connection from 27521 [el1] - 27097 [el0]
connects.
I'm running...
rpt fun 27521 *33452514
and 27097 connects.
___ echolink.conf _____
[el0]
ipaddr=208.110.93.103
confmode=no
maxstns=100
call=*KD0EAV*
pwd=************
name=Allstar Hub (27097)
qth=Allstar Hub (27097)
email=kd0eav@clear-sky.net
rtcptimeout=10
node=424491
astnode=27097
context=radio-secure
server1=server1.echolink.org
server2=server3.echolink.org
[el1]
ipaddr=208.110.93.108
confmode=no
call=KD0EAV-L
pwd=***********
name=Allstar ast27521
qth=Allstar ast27521
email=kd0eav@clear-sky.net
rtcptimeout=10
node=422327
astnode=27521
context=radio-secure
server1=server1.echolink.org
server2=server3.echolink.org
permit=KD0EAV
maxstns=1
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users