Hi all,
we are operating a bunch of Allstar/app_rpt nodes here in South Tyrol,
and they are all working perfectly!
A couple of weeks ago we decided to switch one of our old 2M echolink
nodes to app_rpt with chan_echolink.

So far so good, seems to work - but - here comes the problem: in certain
cases (I think it is when users connect via Echolink App over a relay
connection) in the asterisk cli you can see, that there are 30 and more
echolink connections being accepted by the system. And in that case, the
telemetry output starts for all these connections - so the node keeps
sending out telemetry "node x connected to node y" for about 5 minutes
or even longer.

Is there anyone having the same problem? I have no idea how to resolve
this issue

Best regards
Simon, IN3FQQ
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.