There is a function for that which is documented in the apt_rpt comments, of all the darn places :-) It's ilink 7 which is the last node to key us.

But (if I may say myself) Allmon is way better for that. It's one of the main reasons Allmon was written. The node currently keying, or the last node that keyed is always at the top of the list. You can even see that if you didn't have you browser open when the keyup(s) occurred. And the key ups are time stamped.

I'm biased but I don't know how a handful or more of nodes is managed without Allmon. https://github.com/tsawyer/allmon2

On Tue, Dec 20, 2016 at 2:12 PM, gregory <dropbox@digitalattack.org> wrote:

probably been asked, sorry. Looking for a way to search the archives..... in the scenario where 5 nodes connect into one node. is there a command in the cli available i can enter in the "one" node to see who is causing the transmit if it is currently transmitting? All the nodes are private nodes. The nodes don't have lsnodes or allmon installed on it.

Gregory.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

Tim