On 2/25/2018 9:27 AM, Sam Nabkey wrote:

No GPS, Nothing abnormal on CLI or wireshark. nothing at all on either RTCM...  Buffers set using the howtow on the wikki  I will try 1200 and 250.

DELL R210II Server...

There are *some* Dell servers that will not run Asterisk - app_rpt correctly.  I used a Dell 1850 for years on nodes 2135, 2124 and the NYLRS hub - never a problem.  I was given some (newer) Dell servers to aid with our WAN Repeater project.  Two of them were Dell 1950's, and both of them would produce this underwater effect.  I had everyone familiar with app_rpt look at this, with no explanation. My resolve was to move to a different server.  Note that 2135, 2124 and the other hub has NO connected radios - it's only a hub. Sometimes the underwater problem only affected one of the hub nodes.  I now have a few SuperMicro servers running this series of hubs with no problem.  Same distribution and all.

My suggestion is to try different hardware.

Kevin W3KKC

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.