Yes, the same way all of the distros have for a while now. All the distros "support" chan_usbradio with full dsp,
however the VIA motherboards and some of the older i686 ones dont have enough
CPU power.

Certainly all the ATOM-based boards and even some earlier ones will do at least 2 channels
and even the newer dual-core ATOMs should do more.

JIM

Date: Thu, 6 Oct 2011 10:19:51 -0400
From: jrorke@cogeco.ca
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] for those Limey Linux and or D525MW users who are brave enough

Hi Jim, does this new Limey distro support chan_usbradio full dsp, full duplex and can it support multi nodes?

Thanks

Jon VA3RQ

On 10/6/2011 9:46 AM, Jim Duuuude wrote:

I have compiled a test version of Limey Linux version 1.1.5 that appears
to properly support the new Intel D525MW Atom motherboard.

This is an 'augmented' version of the i686-suported-1.1.5 release, so
it *should* work on all the previously-supported i686 processors, also.

There were some rather major changes (necessary to support SATA
interfaces) in the hard disk driver stuff (even for those MB's that only
have IDE), so it would be nice if some people could verify that this still
works on non-D525MW motherboards (at least the ones that work in
the normal release).

I have tested this release on both a D525MW and the D945GCLF series
motherboards, and it seems to work just fine.

Also, if you have 5 minutes to wait for it to boot (since the SWINE boot loader does
not support anything faster then USB 1.1 speed, YUCH!), you can flash
the distro onto a USB pen drive (>= 128 MB), and it will work. Once the
OS loads, it runs at full speed, just the initial boot load is PAINFULLY slow.

If you dare, here is the URL for this version:

http://stats.allstarlink.org/limeylinux/downloads/cfimg-D525MW-1.1.5.tar.gz

JIM WB6NIL
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users