Date: Thu, 20 Dec 2012 15:24:36 -0800
From: wb5nfc@yahoo.com
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] Quad Card User IO Question
I'm looking into the possibility of using the NO6B Remote Base Interface with my Quad Card.
The NO6B RBI is designed to accept the Doug Hall generic data stream, control a Kenwood TMG-707 and is primarily used with LinkComm controllers. The RBI expects standard TTL logic levels (<0.8 V for 0, >2.0 V for 1).
Would this
interface be driven properly with UIOA & UIOB on the Quad Card? Is the Doug Hall generic protocol currently supported by app_rpt?
Thanks for any help in identifying potential challenges and pitfalls.
John / WB5NFC
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users