Trying to convert a usbradio box to simpleusb. But thew usbradio setup uses pins on the parallel port for PTT and COS in. Tried this with simpleusb and no-go. Looked in the most recent source for simpleusb.c and I see reference to the port:

#define PP_MASK 0xbffc
#define PP_PORT "/dev/parport0"
#define PP_IOPORT 0x378

But in the configs section of the source I see:

carrierfrom = usb ;no,usb,usbinvert
 
which does not show pp or ppinvert as choices.
 
So...am I chasing my tail? If simpleusb cannot work with pport I'll leave it as-is.
 
commands radio, rpt no longer there. Channeltypes shows simpleusb, not radio.
 

Then I also remember there should be a file in /etc/asterisk (I think) that tells it what kind of channel it is, but I am having severe senior moment-itis..
 
Can anyone un confuse me? And yes, latest sources are installed.

 




George J Csahanin
W2DB
Cedar Park, TX
512-401-2630
401-338-0568 cel