Hello Tim, 

I am relatively new to Allstar, having just got it up and running for less than a week now. I have access to the computer I am running Allstar on only through SSH. After logging in I tried the command you posted: 

*CLI> rpt lstats <yournode>  

And I am not having any luck.

This is what what I am getting:

[root@KK7XX ~]# rpt lstats 28806

-bash: rpt: command not found

[root@KK7XX ~]# 

At this point, I am not sure if I am using the command correctly, or else this command is performed from some sort of web interface that I am not aware of yet. I almost think it is the later after looking at the image you have attached below.

I appreciate the help you offer and thanks for sharing your knowledge of Allstar.

Best regards, 

Luke 


On Tue, Mar 10, 2015 at 12:41 PM, Tim Sawyer <tim.sawyer@mac.com> wrote:
*CLI> rpt lstats <yournode>

Or use Allmon...


--
Tim
:wq

On Mar 10, 2015, at 11:40 AM, Robert Newberry <N1XBM@amsat.org> wrote:

I wrote it down a while back but now have lost my notes. I've tried google and I must be using the wrong terms.

Is there a way to show the IP addresses of the nodes connected to my node? I thought it could be done from the CLI?

Thank you

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.