I have retested on a HP DC6000 and it seems reliable so far and the issue is mostly not there.

When first starting the computer 2 things happen

Most of the URI's show the following message immediately after boot then they stop. Could this be normal and  / or nothing to worry about as it only seems to happen on a reboot?

[Sep 29 07:46:00] WARNING[1212]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43826]
[Sep 29 07:46:00] WARNING[1212]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43826] wasn't stuck after all.

Secondly after re-downloading the configuration from the AllStar web site sometimes 2 of the URI's reverse their node assignments, and after several reboots they reverse again. what can i do to prevent this?

thank you

Chris


From: C B <harvard5362@yahoo.com>
To: "szingman@msgstor.com" <szingman@msgstor.com>
Sent: Saturday, September 24, 2016 9:01 AM
Subject: Re: [App_rpt-users] New server not starting asterisk relabily

Hi

thank you for the link to a different installer.

64 bit was used however i have the same result

as there are several of this model taken out of service (and in the recycle pile, only reason taken out of service i was told is that they are upgrading all I3s) i can get another on Monday to try if you think it could be a hardware failure.

Or i can try anything you wish if you have another idea.

I am building to to replace a failing RLC DSP 404 and the site will be inaccessible for several months once winter hits thus i am attempting to test for  reliability a little more than usual before deploying.

Thank you very much for the help

Chris




From: Steve Zingman <szingman@msgstor.com>
To: C B <harvard5362@yahoo.com>
Sent: Saturday, September 24, 2016 6:43 AM
Subject: Re: [App_rpt-users] New server not starting asterisk relabily

Give this installer a try.
<http://tinyurl.com/amd64-i386-DIAL-RC1>

On 09/24/2016 09:33 AM, C B wrote:
cannot submit urb 0, error -28 not enough bandwidth

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic