Send App_rpt-users mailing list submissions to
app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
app_rpt-users-request@ohnosec.org
You can reach the person managing the list at
app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Reset to channel 1 on radius (Skyler F)
----------------------------------------------------------------------
Message: 1
Date: Tue, 12 Apr 2016 22:30:23 -0600
From: Skyler F <electricity440@gmail.com>
To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Reset to channel 1 on radius
Message-ID:
<CAJNyT08s-8MODP=r2gVFykAJ8F9NFycWd9OmrgpYnLensR6-gQ@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
AllStar Remote base wise, I am using some radius radios (m216 for VHF,
SM120 UHF). The VHF one does have Channel steer option on the software, but
I don't get to use every channel that the radio has :( only 8 instead of
16. With the amount of repeaters here in Denver , I need as many channels
as I can get!
I can easily simulate key presses, but I would like a reliable way to reset
the channel back to original state. These radius radios remember the
channel they were on after a power cycle (unfortunately, in my case). Is
there any way to force it to go back to channel one?
73,
Skyler KD?WHB
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20160412/2a9381ee/attachment-0001.html>
------------------------------
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
End of App_rpt-users Digest, Vol 86, Issue 42
*********************************************