On Nov 25, 2015, at 11:37 AM, mike@midnighteng.com wrote:
If you are looking to connect to nodes on the allstar network from your pc, use the
web transceiver. That is what it was built for.
To set iaxrpt up with a specific node outside of your nat, that node would need to
set-up a path through their firewall to their nat.
iaxrpt was made for local network/nat. Not that it can't be conscrewed to do
otherwise. But that requires specific set-up for the path for each willing
participant. It is merely a "phone extension" as a iax software interface attaching
to a pre-described iax port in asterisk.
...mike/kb8jnmThanks Mike, I was trying to know if I can obtain this information for another
station (other than my own) on the node list.
Say for example I want to use the iaxRpt client on my computer to connect to a node
far way like one of the Alaska nodes, is there a way to discover the settings for
that station to create an account is iaxRpt ?
Thanks for any help on this. -Dan KM6HKOn Nov 25, 2015, at 10:25 AM, mike@midnighteng.com wrote:
Hostname = local ip or host name
User & pass = whatever you set-up in iax.conf
ex:
[gui]
type=user
context=radio-gui ;user
username=gui
auth=md5
secret=PASS ;pass
host=dynamic
disallow=all
allow=gsm
notransfer=yes
Hope it helped a little.
...mike/kb8jnmI am not a guru on AllStar so need help on the obvious:
How do I obtain the following information for any given node on the system for
configuration of iaxRpt client? :
For iaxRpt I need:
1;) How do I obtain the IP address for any given node on the system?
2.) The host is IPaddress, right ?
3.) Username for that system
4.) Password for that system
For example, I am trying to configure iaxRp client t and need to know the
information and the host / username / password
From my own system I can get this dump:
Can I get this from any given user on the system -or-
Can I assume that “allstar-public” with password of “allstar” is
universally installed ??
KM6HK*CLI> iax2 show users
Username Secret Authen Def.Context A/C
Codec Pref
gui dan94025 000000000000002 radio-gui No
Host
allstar-public allstar 000000000000002 allstar-public No
Host
allstar-sys Key: allstar 000000000000004 allstar-sys No
Host
radio -no secret- 000000000000003 radio-secure No
Host
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
bottom of the page. Enter your email address and press the "Unsubscribe or edit
options button"
You do not need a password to unsubscribe, you can do it via email confirmation.
If
you have trouble unsubscribing, please send a message to the list detailing the
problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
<http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
<http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe or
edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation.
If you have trouble unsubscribing, please send a message to the list detailing
the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.