Hi

tried rebuilding onto a newer HP6200 I3.

similar issue when using a specific 4 ( on the back the 4 ports that are vertically in line) of the 10 available USB ports, however an additional message is displayed on the local terminal

"usb 1-1.1 cannot submit urb 0, error -28 not enough bandwidth"

If i don't use any of those 4 ports all seems OK. (utilizing the 2 in the back that are under the Ethernet jack and 2 of the 4 in the front)

The specifications for the DC6200 say that all ports are USB 2.0 and do not indicate any difference.

I am worried that if this is a hardware failure that it could fail in service, if it is a software issue i would like to resolve it. 

if it is normal then i can use this server.

Any help appreciated.

Chris 




From: C B <harvard5362@yahoo.com>
To: "szingman@msgstor.com" <szingman@msgstor.com>; "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Sent: Thursday, September 22, 2016 9:58 AM
Subject: Re: [App_rpt-users] New server not starting asterisk relabily

Thank you for your responce

here is the output you requested

Chris

root@N6LXX-BLUE:~# asterisk -vvvcd
Asterisk 1537, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Parsing /etc/asterisk/asterisk.conf
Parsing /etc/asterisk/logger.conf
Asterisk Event Logger Started /var/log/asterisk/event_log
Asterisk Dynamic Loader Starting:
[Sep 22 09:52:16] NOTICE[707]: dnsmgr.c:394 do_reload: Managed DNS entries will be refreshed every 300 seconds.
  == Manager registered action Ping
  == Manager registered action Events
  == Manager registered action Logoff
  == Manager registered action Hangup
  == Manager registered action Status
  == Manager registered action Setvar
  == Manager registered action Getvar
  == Manager registered action GetConfig
  == Manager registered action UpdateConfig
  == Manager registered action Redirect
  == Manager registered action Originate
  == Manager registered action Command
  == Manager registered action ExtensionState
  == Manager registered action AbsoluteTimeout
  == Manager registered action MailboxStatus
  == Manager registered action MailboxCount
  == Manager registered action ListCommands
  == Manager registered action UserEvent
  == Manager registered action WaitEvent
Asterisk Management interface listening on port XXXXX
[Sep 22 09:52:16] NOTICE[707]: cdr.c:1416 do_reload: CDR simple logging enabled.
  == RTP Allocating from port range 5000 -> 31000
  == UDPTL allocating from port range 4500 -> 4999
Asterisk PBX Core Initializing
Registering builtin applications:
 [Answer]
  == Registered application 'Answer'
 [BackGround]
  == Registered application 'BackGround'
 [Busy]
  == Registered application 'Busy'
 [Congestion]
  == Registered application 'Congestion'
 [Goto]
  == Registered application 'Goto'
 [GotoIf]
  == Registered application 'GotoIf'
 [GotoIfTime]
  == Registered application 'GotoIfTime'
 [ExecIfTime]
  == Registered application 'ExecIfTime'
 [Hangup]
  == Registered application 'Hangup'
 [NoOp]
  == Registered application 'NoOp'
 [Progress]
  == Registered application 'Progress'
 [ResetCDR]
  == Registered application 'ResetCDR'
 [Ringing]
  == Registered application 'Ringing'
 [SayNumber]
  == Registered application 'SayNumber'
 [SayDigits]
  == Registered application 'SayDigits'
 [SayAlpha]
  == Registered application 'SayAlpha'
 [SayPhonetic]
  == Registered application 'SayPhonetic'
 [SetAMAFlags]
  == Registered application 'SetAMAFlags'
 [SetGlobalVar]
  == Registered application 'SetGlobalVar'
 [Set]
  == Registered application 'Set'
 [ImportVar]
  == Registered application 'ImportVar'
 [Wait]
  == Registered application 'Wait'
 [WaitExten]
  == Registered application 'WaitExten'
  == Manager registered action DBGet
  == Manager registered action DBPut
Asterisk Dynamic Loader Starting:
[Sep 22 09:52:16] NOTICE[707]: loader.c:874 load_modules: 53 modules will be loaded.
res_adsi.so => (ADSI Resource)
    -- Loaded PUBLIC key 'iaxtel'
    -- Loaded PUBLIC key 'freeworlddialup'
    -- Loaded PUBLIC key 'allstar'
res_crypto.so => (Cryptographic Digital Signatures)
    -- Registered extension context 'parkedcalls'
    -- Added extension '700' priority 1 to parkedcalls
  == Registered application 'ParkedCall'
  == Registered application 'Park'
  == Manager registered action ParkedCalls
  == Manager registered action Park
res_features.so => (Call Features Resource)
    -- Registered indication country 'us'
    -- Registered indication country 'au'
    -- Registered indication country 'fr'
    -- Registered indication country 'de'
    -- Registered indication country 'nl'
    -- Registered indication country 'uk'
    -- Registered indication country 'fi'
    -- Registered indication country 'no'
    -- Setting default indication country to 'us'
  == Registered application 'PlayTones'
  == Registered application 'StopPlayTones'
res_indications.so => (Indications Resource)
  == Registered application 'Authenticate'
app_authenticate.so => (Authentication Application)
  == Registered application 'Dial'
  == Registered application 'RetryDial'
app_dial.so => (Dialing Application)
  == Registered application 'Exec'
  == Registered application 'TryExec'
  == Registered application 'ExecIf'
app_exec.so => (Executes dialplan applications)
  == Registered application 'MacroExit'
  == Registered application 'MacroIf'
  == Registered application 'MacroExclusive'
  == Registered application 'Macro'
app_macro.so => (Extension Macros)
  == Registered application 'Playback'
app_playback.so => (Sound File Playback Application)
  == Manager registered action RptLocalNodes
  == Manager registered action RptStatus
  == Registered application 'Rpt'
app_rpt.so => (Radio Repeater/Remote Base Application)
  == Registered application 'TrySystem'
  == Registered application 'System'
app_system.so => (Generic System() application)
  == Registered application 'Transfer'
app_transfer.so => (Transfer)
  == Registered application 'DAHDISendKeypadFacility'
  == Registered application 'ZapSendKeypadFacility'
    -- Automatically generated pseudo channel
  == Registered channel type 'DAHDI' (DAHDI Telephony Driver w/PRI)
  == Manager registered action DAHDITransfer
  == Manager registered action ZapTransfer
  == Manager registered action DAHDIHangup
  == Manager registered action ZapHangup
  == Manager registered action DAHDIDialOffHook
  == Manager registered action ZapDialOffHook
  == Manager registered action DAHDIDNDon
  == Manager registered action ZapDNDon
  == Manager registered action DAHDIDNDoff
  == Manager registered action ZapDNDoff
  == Manager registered action DAHDIShowChannels
  == Manager registered action ZapShowChannels
  == Manager registered action DAHDIRestart
  == Manager registered action ZapRestart
chan_dahdi.so => (DAHDI Telephony)
  == Refreshing DNS lookups.
  == Registered custom function IAXPEER
  == Registered application 'IAX2Provision'
  == Manager registered action IAXpeers
  == Manager registered action IAXnetstats
  == Using TOS bits 30
  == Binding IAX2 to '0.0.0.0:4569'
  == adding dns manager for 'register.allstarlink.org'
  == adding dns manager for 'register.allstarlink.org'
  == adding dns manager for 'register.allstarlink.org'
  == adding dns manager for 'register.allstarlink.org'
[Sep 22 09:52:16] WARNING[707]: acl.c:345 ast_append_ha:  is not a valid IP
  == Registered channel type 'IAX2' (Inter Asterisk eXchange Driver (Ver 2))
  == 10 helper threads started
  == IAX Ready and Listening
  == Loaded firmware 'iaxy.bin'
chan_iax2.so => (Inter Asterisk eXchange (Ver 2))
  == Registered channel type 'Local' (Local Proxy Channel Driver)
chan_local.so => (Local Proxy Channel (Note: used internally by other modules))
    -- Registered IAX2 to '67.215.233.178', who sees us as 71.95.13.249:4569 with no messages waiting

    -- Registered IAX2 to '67.215.233.178', who sees us as 71.95.13.249:4569 with no messages waiting

    -- Registered IAX2 to '67.215.233.178', who sees us as 71.95.13.249:4569 with no messages waiting

    -- Registered IAX2 to '67.215.233.178', who sees us as 71.95.13.249:4569 with no messages waiting

  == Registered channel type 'SimpleUSB' (Simple USB (CM108) Radio Channel Driver)
chan_simpleusb.so => (simple usb Radio Interface Channel Driver)
  == Registered translator 'adpcmtolin' from format adpcm to slin, cost 1
  == Registered translator 'lintoadpcm' from format slin to adpcm, cost 1
codec_adpcm.so => (Adaptive Differential PCM Coder/Decoder)
  == Registered translator 'alawtolin' from format alaw to slin, cost 1
  == Registered translator 'lintoalaw' from format slin to alaw, cost 1
codec_alaw.so => (A-law Coder/Decoder)
  == Registered translator 'alawtoulaw' from format alaw to ulaw, cost 1
  == Registered translator 'ulawtoalaw' from format ulaw to alaw, cost 1
codec_a_mu.so => (A-law and Mulaw direct Coder/Decoder)
  == Registered translator 'g726tolin' from format g726 to slin, cost 1
  == Registered translator 'lintog726' from format slin to g726, cost 1
  == Registered translator 'g726aal2tolin' from format g726aal2 to slin, cost 1
  == Registered translator 'lintog726aal2' from format slin to g726aal2, cost 1
  == Registered translator 'g726aal2tog726' from format g726aal2 to g726, cost 1
  == Registered translator 'g726tog726aal2' from format g726 to g726aal2, cost 1
codec_g726.so => (ITU G.726-32kbps G726 Transcoder)
  == Registered translator 'gsmtolin' from format gsm to slin, cost 1
  == Registered translator 'lintogsm' from format slin to gsm, cost 1
codec_gsm.so => (GSM Coder/Decoder)
  == Registered translator 'ulawtolin' from format ulaw to slin, cost 1
  == Registered translator 'lintoulaw' from format slin to ulaw, cost 1
codec_ulaw.so => (mu-Law Coder/Decoder)
  == Registered file format g723sf, extension(s) g723|g723sf
format_g723.so => (G.723.1 Simple Timestamp File Format)
  == Registered file format g726-40, extension(s) g726-40
  == Registered file format g726-32, extension(s) g726-32
  == Registered file format g726-24, extension(s) g726-24
  == Registered file format g726-16, extension(s) g726-16
format_g726.so => (Raw G.726 (16/24/32/40kbps) data)
  == Registered file format g729, extension(s) g729
format_g729.so => (Raw G729 data)
  == Registered file format gsm, extension(s) gsm
format_gsm.so => (Raw GSM data)
  == Registered file format h263, extension(s) h263
format_h263.so => (Raw H.263 data)
  == Registered file format h264, extension(s) h264
format_h264.so => (Raw H.264 data)
  == Registered file format iLBC, extension(s) ilbc
format_ilbc.so => (Raw iLBC data)
  == Registered file format pcm, extension(s) pcm|ulaw|ul|mu
  == Registered file format alaw, extension(s) alaw|al
  == Registered file format au, extension(s) au
  == Registered file format g722, extension(s) g722
format_pcm.so => (Raw/Sun uLaw/ALaw 8KHz (PCM,PCMA,AU), G.722 16Khz)
  == Registered file format sln, extension(s) sln|raw
format_sln.so => (Raw Signed Linear Audio support (SLN))
  == Registered file format vox, extension(s) vox
format_vox.so => (Dialogic VOX (ADPCM) File Format)
  == Registered file format wav49, extension(s) WAV|wav49
format_wav_gsm.so => (Microsoft WAV format (Proprietary GSM))
  == Registered file format wav, extension(s) wav
format_wav.so => (Microsoft WAV format (8000Hz Signed Linear))
  == Registered custom function BASE64_ENCODE
  == Registered custom function BASE64_DECODE
func_base64.so => (base64 encode/decode dialplan functions)
  == Registered custom function CALLERID
func_callerid.so => (Caller ID related dialplan function)
  == Registered custom function CDR
func_cdr.so => (CDR dialplan function)
  == Registered custom function CHANNEL
func_channel.so => (Channel information dialplan function)
  == Registered custom function CURL
func_curl.so => (Load external URL)
  == Registered custom function CUT
  == Registered custom function SORT
func_cut.so => (Cut out information from a string)
  == Registered custom function DB
  == Registered custom function DB_EXISTS
  == Registered custom function DB_DELETE
func_db.so => (Database (astdb) related dialplan functions)
  == Registered custom function ENUMLOOKUP
  == Registered custom function TXTCIDNAME
func_enum.so => (ENUM related dialplan functions)
  == Registered custom function ENV
  == Registered custom function STAT
func_env.so => (Environment/filesystem dialplan functions)
  == Registered custom function GLOBAL
func_global.so => (Global variable dialplan functions)
  == Registered custom function GROUP_COUNT
  == Registered custom function GROUP_MATCH_COUNT
  == Registered custom function GROUP_LIST
  == Registered custom function GROUP
func_groupcount.so => (Channel group dialplan functions)
  == Registered custom function LANGUAGE
func_language.so => (Channel language dialplan function)
  == Registered custom function ISNULL
  == Registered custom function SET
  == Registered custom function EXISTS
  == Registered custom function IF
  == Registered custom function IFTIME
func_logic.so => (Logical dialplan functions)
  == Registered custom function MATH
func_math.so => (Mathematical dialplan function)
  == Registered custom function MD5
  == Registered custom function CHECK_MD5
func_md5.so => (MD5 digest dialplan functions)
  == Registered custom function MUSICCLASS
func_moh.so => (Music-on-hold dialplan function)
  == Registered custom function RAND
func_rand.so => (Random number dialplan function)
  == Registered custom function REALTIME
func_realtime.so => (Read/Write values from a RealTime repository)
  == Setting global variable 'HOMENPA' to '200'
    -- Registered extension context 'default'
    -- Added extension 'i' priority 1 to default
    -- Registered extension context 'radio-secure'
    -- Added extension '43824' priority 1 to radio-secure
    -- Added extension '43827' priority 1 to radio-secure
    -- Added extension '43825' priority 1 to radio-secure
    -- Added extension '43826' priority 1 to radio-secure
    -- Registered extension context 'radio-secure-proxy'
    -- Added extension '43824' priority 1 to radio-secure-proxy
    -- Added extension '43827' priority 1 to radio-secure-proxy
    -- Added extension '43825' priority 1 to radio-secure-proxy
    -- Added extension '43826' priority 1 to radio-secure-proxy
    -- Added extension '_0X.' priority 1 to radio-secure-proxy
    -- Registered extension context 'pstn-out'
    -- Added extension '_NXXNXXXXXX' priority 1 to pstn-out
    -- Added extension '_NXXNXXXXXX' priority 2 to pstn-out
    -- Registered extension context 'invalidnum'
    -- Added extension 's' priority 1 to invalidnum
    -- Added extension 's' priority 2 to invalidnum
    -- Added extension 's' priority 3 to invalidnum
    -- Added extension 's' priority 4 to invalidnum
    -- Registered extension context 'radio'
    -- Added extension '_X11' priority 1 to radio
    -- Added extension '_NXXXXXX' priority 1 to radio
    -- Added extension '_1XXXXXXXXXX' priority 1 to radio
    -- Added extension '_07XX' priority 1 to radio
    -- Added extension '00' priority 1 to radio
    -- Registered extension context 'check_route'
    -- Added extension '_1800NXXXXXX' priority 2 to check_route
    -- Added extension '_1888NXXXXXX' priority 2 to check_route
    -- Added extension '_1877NXXXXXX' priority 2 to check_route
    -- Added extension '_1866NXXXXXX' priority 2 to check_route
    -- Added extension '_1855NXXXXXX' priority 2 to check_route
    -- Added extension '_1X00XXXXXXX' priority 2 to check_route
    -- Added extension '_1X11XXXXXXX' priority 2 to check_route
    -- Added extension '_X11' priority 2 to check_route
    -- Added extension '_1NXX555XXXX' priority 2 to check_route
    -- Added extension '_1NXX976XXXX' priority 2 to check_route
    -- Added extension '_1809XXXXXXX' priority 2 to check_route
    -- Added extension '_1900XXXXXXX' priority 2 to check_route
    -- Added extension '_1NXXXXXXXXX' priority 1 to check_route
    -- Added extension '_X.' priority 2 to check_route
    -- Registered extension context 'my-ip'
    -- Added extension 's' priority 1 to my-ip
    -- Added extension 's' priority 2 to my-ip
    -- Added extension 's' priority 3 to my-ip
    -- Added extension 's' priority 4 to my-ip
    -- Registered extension context 'allstar-sys'
    -- Added extension '0' priority 1 to allstar-sys
    -- Added extension '0' priority 2 to allstar-sys
    -- Added extension '0' priority 3 to allstar-sys
    -- Added extension '_0.' priority 1 to allstar-sys
    -- Added extension '_0.' priority 2 to allstar-sys
    -- Added extension '_0.' priority 3 to allstar-sys
    -- Added extension '_1.' priority 1 to allstar-sys
    -- Added extension '_1.' priority 2 to allstar-sys
    -- Added extension '_2.' priority 1 to allstar-sys
    -- Added extension '_2.' priority 2 to allstar-sys
    -- Added extension '_2.' priority 3 to allstar-sys
    -- Added extension '_2.' priority 4 to allstar-sys
    -- Added extension '_2.' priority 5 to allstar-sys
    -- Added extension '_2.' priority 6 to allstar-sys
    -- Added extension '_2.' priority 7 to allstar-sys
    -- Added extension '_3.' priority 1 to allstar-sys
    -- Added extension '_3.' priority 2 to allstar-sys
    -- Added extension '_3.' priority 3 to allstar-sys
    -- Added extension '_3.' priority 4 to allstar-sys
    -- Added extension '_3.' priority 5 to allstar-sys
    -- Added extension '_3.' priority 6 to allstar-sys
    -- Added extension '_3.' priority 7 to allstar-sys
    -- Added extension '_4.' priority 1 to allstar-sys
    -- Added extension '_4.' priority 2 to allstar-sys
    -- Added extension '_4.' priority 3 to allstar-sys
    -- Added extension '_4.' priority 4 to allstar-sys
    -- Added extension '_4.' priority 5 to allstar-sys
    -- Added extension '_4.' priority 6 to allstar-sys
    -- Added extension '_4.' priority 7 to allstar-sys
    -- Added extension '_5.' priority 1 to allstar-sys
    -- Added extension '_5.' priority 2 to allstar-sys
    -- Added extension '_5.' priority 3 to allstar-sys
    -- Added extension '_5.' priority 4 to allstar-sys
    -- Added extension '_5.' priority 5 to allstar-sys
    -- Added extension '_5.' priority 6 to allstar-sys
    -- Added extension '_5.' priority 7 to allstar-sys
    -- Registered extension context 'allstar-public'
    -- Added extension 's' priority 1 to allstar-public
    -- Added extension 's' priority 2 to allstar-public
    -- Added extension 's' priority 3 to allstar-public
    -- Added extension 's' priority 4 to allstar-public
    -- Added extension 's' priority 5 to allstar-public
    -- Added extension 's' priority 6 to allstar-public
    -- Added extension 's' priority 7 to allstar-public
    -- Added extension 's' priority 8 to allstar-public
    -- Added extension 's' priority 9 to allstar-public
    -- Added extension 's' priority 10 to allstar-public
    -- Added extension 's' priority 11 to allstar-public
    -- Added extension 's' priority 12 to allstar-public
    -- Added extension 's' priority 13 to allstar-public
    -- Added extension 's' priority 14 to allstar-public
    -- Added extension 's' priority 15 to allstar-public
    -- Added extension 's' priority 16 to allstar-public
    -- Added extension 's' priority 17 to allstar-public
    -- Added extension '9999' priority 1 to allstar-public
pbx_config.so => (Text Extension Configuration)
Asterisk Ready.
*CLI>     -- Loading initial config for repeater 43824
[Sep 22 09:52:16] NOTICE[713]: app_rpt.c:21994 rpt_master: Normal Repeater Init  43824
    -- Loading initial config for repeater 43827
    -- Re-Loading config for repeater 43824
[Sep 22 09:52:16] NOTICE[713]: app_rpt.c:21994 rpt_master: Normal Repeater Init  43827
    -- Loading initial config for repeater 43825
    -- rpt (Rx) initiating call to Simpleusb/usb43824 on SimpleUSB/usb43824
    -- Re-Loading config for repeater 43827
[Sep 22 09:52:16] NOTICE[713]: app_rpt.c:21994 rpt_master: Normal Repeater Init  43825
    -- Loading initial config for repeater 43826
    -- rpt (Rx) initiating call to Simpleusb/usb43827 on SimpleUSB/usb43827
[Sep 22 09:52:16] NOTICE[713]: app_rpt.c:21994 rpt_master: Normal Repeater Init  43826
    -- Re-Loading config for repeater 43826
    -- Re-Loading config for repeater 43825
    -- rpt (Rx) initiating call to Simpleusb/usb43826 on SimpleUSB/usb43826
    -- rpt (Rx) initiating call to Simpleusb/usb43825 on SimpleUSB/usb43825
[Sep 22 09:52:19] NOTICE[734]: chan_simpleusb.c:1522 hidthread: Assigned USB device 4-2:1.0 to simpleusb channel usb43824
  == Set device 4-2:1.0 to usb43824
[Sep 22 09:52:19] WARNING[734]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43824.conf for device usb43824 .
[Sep 22 09:52:21] NOTICE[736]: chan_simpleusb.c:1522 hidthread: Assigned USB device 4-1:1.0 to simpleusb channel usb43827
  == Set device 4-1:1.0 to usb43827
[Sep 22 09:52:22] WARNING[736]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 .
[Sep 22 09:52:22] ERROR[733]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!!
    -- Hungup 'DAHDI/pseudo-1667634044'
    -- Hungup 'DAHDI/pseudo-705984013'
    -- Hungup 'DAHDI/pseudo-1881123794'
    -- Hungup 'DAHDI/pseudo-653099833'
    -- Hungup 'DAHDI/pseudo-476996173'
    -- Hungup 'DAHDI/pseudo-2004592085'
    -- Re-Loading config for repeater 43827
[Sep 22 09:52:23] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43827
    -- rpt (Rx) initiating call to Simpleusb/usb43827 on SimpleUSB/usb43827
  == Set device 1-2:1.0 to usb43826
[Sep 22 09:52:24] WARNING[738]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43826.conf for device usb43826 .
[Sep 22 09:52:24] ERROR[737]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!!
    -- Hungup 'DAHDI/pseudo-1351605847'
    -- Hungup 'DAHDI/pseudo-307049283'
    -- Hungup 'DAHDI/pseudo-688419805'
    -- Hungup 'DAHDI/pseudo-562236946'
    -- Hungup 'DAHDI/pseudo-1246242116'
    -- Hungup 'DAHDI/pseudo-39509928'
    -- Re-Loading config for repeater 43826
[Sep 22 09:52:25] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43826
    -- rpt (Rx) initiating call to Simpleusb/usb43826 on SimpleUSB/usb43826
  == Manager 'admin' logged on from 71.95.13.254
  == Set device 1-1:1.0 to usb43825
[Sep 22 09:52:26] WARNING[739]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43825.conf for device usb43825 .
[Sep 22 09:52:26] ERROR[735]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!!
    -- Hungup 'DAHDI/pseudo-1677253818'
    -- Hungup 'DAHDI/pseudo-1372542267'
    -- Hungup 'DAHDI/pseudo-223654489'
    -- Hungup 'DAHDI/pseudo-1373593525'
    -- Hungup 'DAHDI/pseudo-772618664'
    -- Hungup 'DAHDI/pseudo-971160304'
[Sep 22 09:52:27] ERROR[750]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!!
    -- Hungup 'DAHDI/pseudo-554310435'
    -- Hungup 'DAHDI/pseudo-1833530818'
    -- Hungup 'DAHDI/pseudo-2076008742'
    -- Hungup 'DAHDI/pseudo-463789068'
    -- Hungup 'DAHDI/pseudo-603830892'
    -- Hungup 'DAHDI/pseudo-1269505489'
[Sep 22 09:52:27] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43825
    -- Re-Loading config for repeater 43825
    -- rpt (Rx) initiating call to Simpleusb/usb43825 on SimpleUSB/usb43825
  == Set device 4-1:1.0 to usb43827
[Sep 22 09:52:27] WARNING[751]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 .
[Sep 22 09:52:29] ERROR[752]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!!
    -- Hungup 'DAHDI/pseudo-1817601571'
    -- Hungup 'DAHDI/pseudo-506184524'
    -- Hungup 'DAHDI/pseudo-5686270'
    -- Hungup 'DAHDI/pseudo-630381541'
    -- Hungup 'DAHDI/pseudo-2014513745'
    -- Hungup 'DAHDI/pseudo-1166368152'
[Sep 22 09:52:29] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43827
    -- Re-Loading config for repeater 43827
    -- rpt (Rx) initiating call to Simpleusb/usb43827 on SimpleUSB/usb43827
[Sep 22 09:52:29] WARNING[757]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43827]
[Sep 22 09:52:29] WARNING[757]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43827] wasn't stuck after all.
  == Set device 1-2:1.0 to usb43826
[Sep 22 09:52:29] WARNING[753]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43826.conf for device usb43826 .
[Sep 22 09:52:31] ERROR[755]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!!
    -- Hungup 'DAHDI/pseudo-278507476'
    -- Hungup 'DAHDI/pseudo-1292553899'
    -- Hungup 'DAHDI/pseudo-405854212'
    -- Hungup 'DAHDI/pseudo-402938764'
    -- Hungup 'DAHDI/pseudo-2016767570'
    -- Hungup 'DAHDI/pseudo-718214827'
    -- Re-Loading config for repeater 43826
[Sep 22 09:52:31] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43826
    -- rpt (Rx) initiating call to Simpleusb/usb43826 on SimpleUSB/usb43826
[Sep 22 09:52:31] WARNING[759]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43826]
[Sep 22 09:52:31] WARNING[759]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43826] wasn't stuck after all.
  == Set device 1-1:1.0 to usb43825
[Sep 22 09:52:32] WARNING[756]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43825.conf for device usb43825 .
[Sep 22 09:52:33] ERROR[757]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!!
    -- Hungup 'DAHDI/pseudo-1902143774'
    -- Hungup 'DAHDI/pseudo-187405755'
    -- Hungup 'DAHDI/pseudo-1777965740'
    -- Hungup 'DAHDI/pseudo-777214063'
    -- Hungup 'DAHDI/pseudo-1206356314'
    -- Hungup 'DAHDI/pseudo-54466694'
    -- Re-Loading config for repeater 43825
[Sep 22 09:52:33] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43825
    -- rpt (Rx) initiating call to Simpleusb/usb43825 on SimpleUSB/usb43825
[Sep 22 09:52:33] WARNING[761]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43825]
[Sep 22 09:52:33] WARNING[761]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43825] wasn't stuck after all.
  == Set device 4-1:1.0 to usb43827
[Sep 22 09:52:34] WARNING[758]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 .
[Sep 22 09:52:35] ERROR[759]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!!
    -- Hungup 'DAHDI/pseudo-192861649'
    -- Hungup 'DAHDI/pseudo-1853644394'
    -- Hungup 'DAHDI/pseudo-2136391093'
    -- Hungup 'DAHDI/pseudo-985109626'
    -- Hungup 'DAHDI/pseudo-819893627'
    -- Hungup 'DAHDI/pseudo-2006255112'
    -- Re-Loading config for repeater 43827
[Sep 22 09:52:35] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43827
    -- rpt (Rx) initiating call to Simpleusb/usb43827 on SimpleUSB/usb43827
[Sep 22 09:52:35] WARNING[763]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43827]
[Sep 22 09:52:35] WARNING[763]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43827] wasn't stuck after all.
  == Set device 1-2:1.0 to usb43826
[Sep 22 09:52:36] WARNING[760]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43826.conf for device usb43826 .
[Sep 22 09:52:37] ERROR[761]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!!
    -- Hungup 'DAHDI/pseudo-70661778'
    -- Hungup 'DAHDI/pseudo-378161311'
    -- Hungup 'DAHDI/pseudo-1147306302'
    -- Hungup 'DAHDI/pseudo-823777928'
    -- Hungup 'DAHDI/pseudo-1289003945'
    -- Hungup 'DAHDI/pseudo-1090121855'
[Sep 22 09:52:37] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43826
    -- Re-Loading config for repeater 43826
    -- rpt (Rx) initiating call to Simpleusb/usb43826 on SimpleUSB/usb43826
[Sep 22 09:52:37] WARNING[765]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43826]
[Sep 22 09:52:37] WARNING[765]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43826] wasn't stuck after all.
  == Set device 1-1:1.0 to usb43825
[Sep 22 09:52:37] WARNING[762]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43825.conf for device usb43825 .
[Sep 22 09:52:39] ERROR[763]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!!
    -- Hungup 'DAHDI/pseudo-118898930'
    -- Hungup 'DAHDI/pseudo-1965068293'
    -- Hungup 'DAHDI/pseudo-1894346266'
    -- Hungup 'DAHDI/pseudo-604720300'
    -- Hungup 'DAHDI/pseudo-624798991'
    -- Hungup 'DAHDI/pseudo-893661220'
    -- Re-Loading config for repeater 43825
[Sep 22 09:52:39] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43825
    -- rpt (Rx) initiating call to Simpleusb/usb43825 on SimpleUSB/usb43825
[Sep 22 09:52:39] WARNING[767]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43825]
[Sep 22 09:52:39] WARNING[767]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43825] wasn't stuck after all.
  == Set device 4-1:1.0 to usb43827
[Sep 22 09:52:40] WARNING[764]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 .
  == Manager 'admin' logged on from 71.95.13.254
[Sep 22 09:52:41] ERROR[765]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!!
    -- Hungup 'DAHDI/pseudo-711702460'
    -- Hungup 'DAHDI/pseudo-1081947274'
    -- Hungup 'DAHDI/pseudo-602097671'
    -- Hungup 'DAHDI/pseudo-459206108'
    -- Hungup 'DAHDI/pseudo-1165190121'
    -- Hungup 'DAHDI/pseudo-1201172760'
    -- Re-Loading config for repeater 43827
[Sep 22 09:52:41] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43827
    -- rpt (Rx) initiating call to Simpleusb/usb43827 on SimpleUSB/usb43827
[Sep 22 09:52:41] WARNING[770]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43827]
[Sep 22 09:52:41] WARNING[770]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43827] wasn't stuck after all.
  == Set device 1-2:1.0 to usb43826
[Sep 22 09:52:42] WARNING[766]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43826.conf for device usb43826 .
[Sep 22 09:52:43] ERROR[767]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!!
    -- Hungup 'DAHDI/pseudo-898830267'
    -- Hungup 'DAHDI/pseudo-2028926274'
    -- Hungup 'DAHDI/pseudo-1233048473'
    -- Hungup 'DAHDI/pseudo-1272558401'
    -- Hungup 'DAHDI/pseudo-1579607684'
    -- Hungup 'DAHDI/pseudo-1551930100'
  == Set device 1-1:1.0 to usb43825
[Sep 22 09:52:43] WARNING[768]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43825.conf for device usb43825 .
[Sep 22 09:52:43] NOTICE[713]: app_rpt.c:22038 rpt_master: RPT thread restarted on 43825
[Sep 22 09:52:43] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43825
[Sep 22 09:52:43] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43826
    -- Re-Loading config for repeater 43826
    -- rpt (Rx) initiating call to Simpleusb/usb43826 on SimpleUSB/usb43826
[Sep 22 09:52:43] WARNING[773]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43826]
    -- Re-Loading config for repeater 43825
    -- rpt (Rx) initiating call to Simpleusb/usb43825 on SimpleUSB/usb43825
[Sep 22 09:52:43] WARNING[772]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43825]
[Sep 22 09:52:43] WARNING[773]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43826] wasn't stuck after all.
[Sep 22 09:52:43] WARNING[772]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43825] wasn't stuck after all.
  == Set device 4-1:1.0 to usb43827
[Sep 22 09:52:44] WARNING[771]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 .
[Sep 22 09:52:44] WARNING[771]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 3 (usb43827): Device or resource busy
  == Set device 1-1:1.0 to usb43825
[Sep 22 09:52:46] WARNING[775]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43825.conf for device usb43825 .
[Sep 22 09:52:46] WARNING[775]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 1 (usb43825): Device or resource busy
[Sep 22 09:52:47] ERROR[773]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!!
    -- Hungup 'DAHDI/pseudo-1878666487'
    -- Hungup 'DAHDI/pseudo-1877395029'
    -- Hungup 'DAHDI/pseudo-284221816'
    -- Hungup 'DAHDI/pseudo-1553727306'
    -- Hungup 'DAHDI/pseudo-1239774476'
    -- Hungup 'DAHDI/pseudo-1104776365'
  == Set device 1-2:1.0 to usb43826
[Sep 22 09:52:47] WARNING[774]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43826.conf for device usb43826 .
[Sep 22 09:52:47] WARNING[774]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy
  == Set device 4-1:1.0 to usb43827
[Sep 22 09:52:48] WARNING[771]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 .
[Sep 22 09:52:48] ERROR[770]: chan_simpleusb.c:2562 simpleusb_read: HID process has died or something!!
    -- Hungup 'DAHDI/pseudo-120543842'
    -- Hungup 'DAHDI/pseudo-1929022904'
    -- Hungup 'DAHDI/pseudo-1458793075'
    -- Hungup 'DAHDI/pseudo-282469731'
    -- Hungup 'DAHDI/pseudo-1655011998'
    -- Hungup 'DAHDI/pseudo-682780788'
  == Set device 1-1:1.0 to usb43825
[Sep 22 09:52:48] WARNING[775]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43825.conf for device usb43825 .
[Sep 22 09:52:48] WARNING[772]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43825]
[Sep 22 09:52:48] WARNING[772]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43825] wasn't stuck after all.
    -- Re-Loading config for repeater 43827
[Sep 22 09:52:49] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43827
[Sep 22 09:52:49] WARNING[713]: app_rpt.c:22050 rpt_master: rpt_thread restarted on node 43826
    -- Re-Loading config for repeater 43826
    -- rpt (Rx) initiating call to Simpleusb/usb43827 on SimpleUSB/usb43827
[Sep 22 09:52:49] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy
    -- rpt (Rx) initiating call to Simpleusb/usb43826 on SimpleUSB/usb43826
  == Set device 1-2:1.0 to usb43826
[Sep 22 09:52:51] WARNING[1162]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43826.conf for device usb43826 .
[Sep 22 09:52:51] WARNING[1162]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy
[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy
[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy
[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy
[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy
[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy
[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy
[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy
[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy
[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 2 (usb43826): Device or resource busy
[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43826]
[Sep 22 09:52:51] WARNING[1160]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43826] wasn't stuck after all.
  == Set device 4-1:1.0 to usb43827
[Sep 22 09:52:52] WARNING[1161]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 .
[Sep 22 09:52:52] WARNING[1161]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 3 (usb43827): Device or resource busy
  == Set device 4-1:1.0 to usb43827
[Sep 22 09:52:54] WARNING[1161]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb43827.conf for device usb43827 .
[Sep 22 09:52:54] WARNING[1159]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb43827]
[Sep 22 09:52:54] WARNING[1159]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb43827] wasn't stuck after all.

From: Steve Zingman <szingman@msgstor.com>
To: C B <harvard5362@yahoo.com>; "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Sent: Thursday, September 22, 2016 8:26 AM
Subject: Re: [App_rpt-users] New server not starting asterisk relabily

Chris,
Your message went into the wrong folder on my e-mail. Sorry for the delay.

Lets start by NOT auto starting asterisk

add to /etc/init.d/asterisk:
exit 0 after:

DAEMON=/usr/sbin/asterisk
TRUE=/bin/true

So, it should read:

DAEMON=/usr/sbin/asterisk
TRUE=/bin/true
exit 0

reboot and lets see the output of asterisk -vvvcd

73, Steve N4IRS


On 9/21/2016 9:59 PM, C B wrote:
> Hi
>
> Testing a newly built Dial allstarlink server / nodes.
>
> The server is a HP DC5800 1 gig ram and 4 URI’s.
>
> The URI’s where done one at a time, downloading from the allstar web
> configuration.
>
> Sometimes it starts and sometimes it does not, sometimes it stays
> running after I type asterisk at the # prompt.
>
> The log below is some of the output after typing asterisk at the #
> prompt then quickly asterisk –rvvvvvvvvvvvvvvvvvvvvvv
>
> A similar problem that was experienced was due to ACPI.
>
> ACPI was disabled in the BIOS
>
> GRUB_CMDLINE_LINUX_DEFAULT="quiet" was changed to
> GRUB_CMDLINE_LINUX_DEFAULT="quiet acpi=off"
>
> However the server would not boot that way.
>
> Any help greatly appreciated.
>
> Chris

>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>

--
"Just say no to world domination"