Well Ray,

"IF" you are only testing with a node behind your NAT (router)
you will need a definition to route it from each node behind the NAT.

example in rpt.conf

29261 = radio@127.0.0.1/29261,NONE ; ,y =remote base
29283 = radio@127.0.0.1/29283,NONE
29284 = radio@127.0.0.1/29284,NONE
29285 = radio@127.0.0.1/29285,NONE <<<end of all on this server 1

29999 = radio@192.168.1.223/29999,NONE <<<<<<<<<<<< on server 2<<<<<<<<<<<<

Each node behind your nat will need a address defined to be able to connect to it.

...mike/kb8jnm

----- Original Message -----
From:
"Users of Asterisk app_rpt" <app_rpt-users@lists.allstarlink.org>

To:
<app_rpt-users@lists.allstarlink.org>
Cc:

Sent:
Sun, 26 Mar 2017 17:18:46 -0400
Subject:
[App_rpt-users] 2 nodes from the same ip address.

Hello,

I know I've asked this question before, I have one node for my repeater and its a full time connection to a hub and the other node is a portable node to connect to other nodes. They are both on the same Internet connection. I can connect outbound to some nodes and some not but I don't get in bound connections. My nodes are on two separate servers and have two separate ports. Is there something I'm missing? Any help is appreciated! Thank you.

73
Ray,
W2RJR