repeaterbook.com also lists Allstar repeaters. 
--
Tim
:wq

On Oct 11, 2013, at 1:39 PM, Bradley Haney <hammin75@gmail.com> wrote:

IL  Repeater Association will list   ALL-STAR NODES  :)   on the website


On Fri, Oct 11, 2013 at 1:54 PM, <app_rpt-users-request@ohnosec.org> wrote:
Send App_rpt-users mailing list submissions to
        app_rpt-users@ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
        http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
        app_rpt-users-request@ohnosec.org

You can reach the person managing the list at
        app_rpt-users-owner@ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. Re: App_rpt-users Digest, Vol 56, Issue 20 (Bryan D. Boyle)


----------------------------------------------------------------------

Message: 1
Date: Fri, 11 Oct 2013 14:54:13 -0400
From: "Bryan D. Boyle" <bdboyle@bdboyle.com>
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
Message-ID: <D225A0BA-1F24-4F17-A8B0-7219BAF9C2F5@bdboyle.com>
Content-Type: text/plain; charset="us-ascii"

and if you bridge allstar (superior and more flexible) to IRLP (old 1990s technology held together with patches and gyrations), Mr Cameron will get his shorts in a wad and cancel your credentials (but leave you listed as an active node to hide the fact that his numbers of real nodes is less than it was...).

yeah, it still has some mindshare (especially amongst the dinosaurs in the ARRL, who refuse to acknowledge that allstar exists...and despite the population of a* approaching that of the older stuff, have refused to list our nodes as such in the repeater directory...),  but progress waits for no man.

--
Bryan
Sent from my iPad

> On Oct 11, 2013, at 1:47 PM, Johnny Keeker <cypresstower@yahoo.com> wrote:
>
> Plug in your URI, RIM, or usb sound device and you will see it pop up on the linux screen
> as [root@~]  radio-tune-menu
> the radio tune menu will allow you to setup your sound devices provided your .conf files are correct
> ACID is a repeater controller if you have 2 URIs or RIMs  you can bridge your IRLP node
> beside IRLP configured on an ACID install had some audio level issues. Not sure about
> Xipar but it also had configs for IRLP.  I only tested it on ACID
> p.s. Scott I noticed you seen the publicizing for the RIM
> JK
>
> From: Richard Szajkowski <va3rzs@gmail.com>
> To: Johnny Keeker <cypresstower@yahoo.com>
> Cc: App_rpt Users <app_rpt-users@ohnosec.org>
> Sent: Friday, October 11, 2013 1:06 PM
> Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>
> How will I know if it works after I plug it in ? Is there a script that I need to run it install it
>
> I am finding the docs out of date or not there at all (some links are dead like for the 4 port card)
>
> I know IRLP is not supported any more , sad as I run an IRLP node , and would have liked to run all 3 networks on one computer , to save a port for the 220 repeater
>
> I thank you for all your help ,
>
> Richard Szajkowski
>
>
>> On Oct 11, 2013, at 12:43 PM, Johnny Keeker <cypresstower@yahoo.com> wrote:
>>
>> I don't know the device but if it has a CM108 or CM119 chip it will.
>> Personally, I use startech sound fobs. They're easily modifiable
>> using surface mount components and they're reliable. URI's are very
>> good, but have my eye on the RIM as it has advantages over the URI.
>> JK
>> From: Richard Szajkowski <va3rzs@gmail.com>
>> To: Johnny Keeker <cypresstower@yahoo.com>
>> Sent: Friday, October 11, 2013 11:42 AM
>> Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>>
>> Do you know if the signal link USB sound card would work ????  I have ordered a uri , but I was asked if I would host a node for another repeater
>>
>> Richard Szajkowski
>>
>>
>>> On Oct 10, 2013, at 8:31 PM, Johnny Keeker <cypresstower@yahoo.com> wrote:
>>>
>>> At the least you have success.  It takes about 10 minutes or less, when you first boot
>>> before your node reports to all the other on-line nodes. Some of my nodes
>>> use a static IP and others DHCP with reserved address.  Let us all know how things
>>> work out for you.
>>> Good luck Richard
>>> JK
>>>
>>> From: Richard Szajkowski <va3rzs@gmail.com>
>>> To: Johnny Keeker <cypresstower@yahoo.com>
>>> Sent: Thursday, October 10, 2013 7:02 PM
>>> Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>>>
>>> I now have what I think is a working system ,
>>>
>>> For some reason it fails if I put in a static IP , but if I run with DHCP it finds the mic and runs
>>>
>>> If I tell it to pull down the info from the server for he node it dies
>>>
>>> I need it on a static IP for port fowarding , just like my other VoIP systems
>>>
>>> And I did do the info on the web portal to the best I can, I entered in all the info it requested
>>>
>>> I even got to install your device now , this will be here Tuesday because of our long weekend
>>>
>>> Thanks for all the help
>>>
>>> Richard Szajkowski
>>>
>>>
>>>> On Oct 10, 2013, at 6:31 PM, Johnny Keeker <cypresstower@yahoo.com> wrote:
>>>>
>>>> did you Not Create an installation disk????
>>>> I thought you were past that point and sitting at the test prompt
>>>> If you completed the ACID install and got the test prompt
>>>> the password is 'setup'
>>>> once your in root type passwd and change it
>>>> nodesetup.sh   will run the script to push your node config files from the allstar server to
>>>> your node "provided you created and saved the files prior to your ACID installation"
>>>> JK
>>>>
>>>>
>>>>
>>>> From: "zeppelin.1@netzero.com" <zeppelin.1@netzero.com>
>>>> To: app_rpt-users@ohnosec.org
>>>> Sent: Thursday, October 10, 2013 5:20 PM
>>>> Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>>>>
>>>> Hello Richard and welcome to the Linux world;
>>>>                                                                   You "must" do a CD BURN to the ISO for it to work properly, low speed is best for older CD ROM.
>>>> 73 Anton/ KC2RQR
>>>> Node 29103
>>>>
>>>> ---------- Original Message ----------
>>>> From: app_rpt-users-request@ohnosec.org
>>>> To: app_rpt-users@ohnosec.org
>>>> Subject: App_rpt-users Digest, Vol 56, Issue 20
>>>> Date: Thu, 10 Oct 2013 12:00:01 -0400
>>>>
>>>> Send App_rpt-users mailing list submissions to
>>>> app_rpt-users@ohnosec.org
>>>>
>>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> or, via email, send a message with subject or body 'help' to
>>>> app_rpt-users-request@ohnosec.org
>>>>
>>>> You can reach the person managing the list at
>>>> app_rpt-users-owner@ohnosec.org
>>>>
>>>> When replying, please edit your Subject line so it is more specific
>>>> than "Re: Contents of App_rpt-users digest..."
>>>>
>>>>
>>>> Today's Topics:
>>>>
>>>>   1. Help with new install (Richard Szajkowski)
>>>>
>>>>
>>>> ----------------------------------------------------------------------
>>>>
>>>> Message: 1
>>>> Date: Wed, 9 Oct 2013 18:14:55 -0400
>>>> From: Richard Szajkowski <va3rzs@gmail.com>
>>>> To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
>>>> Subject: [App_rpt-users] Help with new install
>>>> Message-ID: <B2A7C8C9-28C3-4A33-8F56-558F97D69D7D@gmail.com>
>>>> Content-Type: text/plain; charset=us-ascii
>>>>
>>>> Hello to the group
>>>>
>>>> I am trying to get the computer on line while my interface is shipped
>>>>
>>>> I downloaded the ISO off the website , followed the prompts , I am not at a prompt
>>>> Test >
>>>>
>>>> I did not enter a root password as I was not asked
>>>>
>>>> I can't find a PDF or anything on 1st time installs
>>>>
>>>> Any help would be great
>>>>
>>>> Thanks
>>>>
>>>> Richard Szajkowski va3rzs
>>>>
>>>>
>>>>
>>>> ------------------------------
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users@ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>>
>>>> End of App_rpt-users Digest, Vol 56, Issue 20
>>>> *********************************************
>>>> ____________________________________________________________
>>>> NetZero now offers 4G mobile broadband. Sign up now.
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users@ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users@ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20131011/9fe186ed/attachment.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 56, Issue 28
*********************************************

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users