On 10/31/17 3:20 PM, David KE6UPI wrote:
> Check rpt.conf. Look at [nodes]
>
> You should have something like this.
> 2081 = radio@127.0.0.1:4569/2081,NONE
> 2082 = radio@127.0.0.1:4569/2082,NONE

It's as configured.
40821 = radio@127.0.0.1:4578/40821,NONE         ; 224.280
41618 = radio@127.0.0.1:4578/41618,NONE         ; 443.525
42032 = radio@127.0.0.1:4578/42032,NONE         ; 927.050


> The 127.0.0.1 is your local server loopback IP address. This keep the
> Internet from going out and back in.
>
> If that looks good. You can try pinging and/or traceroute to 127.0.0.1 if
> the problem happens again. The problem could be a firewall or ARP. If you
> run Fail2ban whitelist 127.0.0.1.

Lo0 is up.  I really doubt it's this.

root@Itchy:/var/log/asterisk/rpt-audio/41618# ifconfig lo0
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:2058417942 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2058417942 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:133746737506 (124.5 GiB)  TX bytes:133746737506 (124.5 GiB)

There is something else afoot here and it's likely inside asterisk/app_rpt. :(

--
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.