I have a real simple setup right now. Both sites can RX and TX. Of course in voting, ACID is going to use the best RX signal and send that back out to the RTCMs for the TX audio that feeds the repeaters. I am still working on a master clock solution for the transmitters. As of right now at the location I am testing, I am not hearing any heterodyne in the TX audio. Of course this can and will change depending on my location in reference to the sites.

Site 1 - master

Node running ACID

Kenwood TKR-820 repeater

RTCM

Garmin 18x LVC

Site 2

Kenwood TKR-820 repeater

RTCM

Garmin 18x LVC

On Tue, Aug 13, 2013 at 7:17 PM, Geoff <w5omr@att.net> wrote:

On 08/13/2013 07:04 PM, Michael Hebert wrote:

A BIG THANK YOU TO JIM!!!

Voted simulcast up and running!

On Tue, Aug 13, 2013 at 6:37 PM, Jim Duuuude <telesistant@hotmail.com> wrote:

I was able to help this dude.

Solutions all around! Sounds like progress was made.

Now that the problem has been solved, I wanted to ask, Michael, how are you voting?
I'm assuming you've got several receiving locations around your area, and the radios that are connected to those Allstar computing devices, are they just receivers with the audio talking back to the main repeater, or actual repeaters listening on one frequency, and re-transmitting back to the main repeater, using Allstar as the voter?

Long question.

-Geoff

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users