Check rpt.conf. Look at [nodes]

You should have something like this.

2081 = radio@127.0.0.1:4569/2081,NONE

2082 = radio@127.0.0.1:4569/2082,NONE

The 127.0.0.1 is your local server loopback IP address. This keep the Internet from going out and back in.

If that looks good. You can try pinging and/or traceroute to 127.0.0.1 if the problem happens again. The problem could be a firewall or ARP. If you run Fail2ban whitelist 127.0.0.1.

David

KE6UPI

On Tue, Oct 31, 2017 at 11:50 AM, Bryan Fields <Bryan@bryanfields.net> wrote:

I have 3 nodes on the same server, and have seen this behavior before, and
it's happening now again.

My node 40821, 41618, 420 are linked and report as linked, but a user on one
doesn't bring the other up and vice versa. A restart will clear it, but is
there any troubleshooting I can do to debug this problem?

Thanks,
--
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.