2012-06-04 14:05:58 UTC: WB9UUS-R>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468
2012-06-04 14:06:08 UTC: WB9UUS-R>APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*140608z4030.38N708859.28WAAsterisk app_rpt user
2012-06-04 14:38:05 UTC: WB9UUS-R>APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*143805z4030.28N908859.28WAAsterisk app_rpt user [Invalid object]
2012-06-04 15:00:22 UTC: WB9UUS-R>APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*150021z4030.38N908859.28WAAsterisk app_rpt user
2012-06-04 15:13:33 UTC: WB9UUS-R>APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*151333z4030.28N708859.28WAAsterisk app_rpt user [Invalid object]
2012-06-04 15:52:32 UTC: WB9UUS-R>APSTAR,TCPIP*,qAC,CORE-2:;WB9UWA-12*155231z4030.18N708859.28WAAsterisk app_rpt user
2012-06-04 15:52:39 UTC: WB9UUS-R>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468

On Thu, May 3, 2012 at 8:09 PM, Bradley Haney <kc9gqr@gmail.com> wrote:

To get aprs TT working on ALLSTARLINK down load the latest from the SVN.

Upgrading Asterisk to latest (SVN) version

If you are using a brand-new current version of ACID or Limey Linux
(that was released after the implementation of this new Portal) you
are already upgraded sufficiently. If not ...

Asterisk must be upgraded to the latest SVN version.

For the ACID distribution (and other Linux platforms):
cd /usr/src
rm -rf astsrc
wget http://x.allstarlink.org/svn-trunk.tar.gz -O- | tar xzv
mv trunk astsrc
cd astsrc
make upgrade-acid

Then go into the rpt.conf file and add APRSTT=

some where in that file. I made it the first line in that config file
right underneath the node number

Then just google APRS TT and there is a link on Bob's aprs site on
everything about APRSTT..

Then to get it to only beacon every 10 min's i added interval=600
into the gps.conf file.

73's

Bradley
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users