in rpt.conf under the [nodes] stanza you'd want somthing like this

1234 = radio@10.0.0.x:4569/1234,NONE
1235 = radio@10.0.0.x:4569/1235,NONE

That would be the IP and node number of the remote node(s)

You'd also want to comment out the register stuff in iax.conf so private nodes don't try to register with the public allstar server.

On Fri, Sep 2, 2016 at 12:49 PM, <app_rpt-users-request@ohnosec.org> wrote:
Send App_rpt-users mailing list submissions to
        app_rpt-users@ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
        http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
        app_rpt-users-request@ohnosec.org

You can reach the person managing the list at
        app_rpt-users-owner@ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. Re: help with reverse patch setup (mike@midnighteng.com)
   2. Private nodes not connecting (N6GKJ Land)
   3. Re: Private nodes not connecting (Corey Dean)
   4. Re: Private nodes not connecting (Steve Zingman)


----------------------------------------------------------------------

Message: 1
Date: Fri, 2 Sep 2016 13:28:00 -0400
From: mike@midnighteng.com
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] help with reverse patch setup
Message-ID:
        <5a9b0d6ed092135ac8bc437002d93094.squirrel@webmail.midnighteng.com>
Content-Type: text/plain;charset=iso-8859-1


While not everyone has the same thing in mind when they use the words REVERSE PHONE
PATCH, I'll gamble on your meaning/need...

The last line where you are making the actual switch(connection) to the radio
interface has to be defined in the same context it is being switch to.
So if it is playing back the digits as per your stanza and not making the
connection (dropping the call/falling through) ,
The last line should look something like this...

exten => 29283,n,Rpt,29283|P

See notes on the "P" designation of documentation but
I think it is stated as "Phone Control Mode"
and there are other modes depending on use/need.
And the character just before it is a command separator,
don't confuse it with others.

...mike/kb8jnm



> While attempting to create a reverse patch a incoming call returns the following
> [Sep ??2 06:54:04] NOTICE[859]: chan_iax2.c:9471 socket_process: Rejected connect
> attempt from 10.xxx.xxx.xxx, request '29883@radio-control' does not exist
>
>
>
> extensions.conf is configured??
> [radio??control]exten => 29883,1,Answerexten => 29883,n,Playback,rpt/nodeexten =>
> 29883,n,Playback,digits/2exten => 29883,n,Playback,digits/9exten =>
> 29883,n,Playback,digits/8exten => 29883,n,Playback,digits/8exten =>
> 29883,n,Playback,digits/3exten => 29883,n,Rpt,29883|D
> iax.conf is configured
>
> [N6LXX-IN]type=friendauth=md5secret=XXXXXXXXXXXXXXdisallow=allallow=ulawallow=gsmcodecpriority=hostcontext=radio-controltransfer=no
> CLI> show dialplan returns (edited)
>
> [ Context 'radio??control' created by 'pbx_config' ]?? '29883' => ?? ?? ?? ??1.
> Answer() ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? [pbx_config]?? ?? ?? ??
> ?? ?? ?? ?? ?? ?? 2. Playback(rpt/node) ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ??
> [pbx_config]?? ?? ?? ?? ?? ?? ?? ?? ?? ?? 3. Playback(digits/2) ?? ?? ?? ?? ?? ??
> ?? ?? ?? ?? ?? ?? [pbx_config]?? ?? ?? ?? ?? ?? ?? ?? ?? ?? 4. Playback(digits/9)
> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? [pbx_config]?? ?? ?? ?? ?? ?? ?? ?? ?? ?? 5.
> Playback(digits/8) ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? [pbx_config]?? ?? ?? ?? ??
> ?? ?? ?? ?? ?? 6. Playback(digits/8) ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ??
> [pbx_config]?? ?? ?? ?? ?? ?? ?? ?? ?? ?? 7. Playback(digits/3) ?? ?? ?? ?? ?? ??
> ?? ?? ?? ?? ?? ?? [pbx_config]?? ?? ?? ?? ?? ?? ?? ?? ?? ?? 8. Rpt(29883|D) ?? ??
> ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? [pbx_config]
>
> CLI> dialplan show 29883@radio-controlThere is no existence of 'radio-control'
> context
> Any help greatly appreciated
> Chris
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If
> you have trouble unsubscribing, please send a message to the list detailing the
> problem.




------------------------------

Message: 2
Date: Fri, 2 Sep 2016 11:23:51 -0700
From: N6GKJ Land <n6gkj1@gmail.com>
To: App RPT Users <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Private nodes not connecting
Message-ID:
        <CANr-_9p6m7i=entjW__WxVFz=9ieb_s3K9Vnax8TtRoJrfRZ=g@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Hi guys,

I have 2 RPI 3 servers running the latest N4IRS release. I have a private
node on each server.

RPI3 #1 is 10.0.0.200 NODE 1000:4568
RPI3 #2 is 10.0.0.201 NODE 1001:4569

Neither node can connect to the other. I am using the CLI inside the
asterisk program to manually connect using
rpt fun 1000 *31001 from server 1

or

rpt fun 1001 *31000 from server 2

Listed here is how the scripts are defined.

extensions.conf
RPI3 #1
[globals]
HOMENPA = 209 ; change this to your Area Code
NODE = 1000   ; change this to your node number

[default]

exten => i,1,Hangup

RPI3 #2
[globals]
HOMENPA = 209 ; change this to your Area Code
NODE = 1001   ; change this to your node number

[default]

exten => i,1,Hangup

[radio-secure]
exten => ${NODE},1,rpt,${NODE}

[radio-secure]
exten => ${NODE},1,rpt,${NODE}


rpt.conf

RPI3 #1
rxchannel = dahdi/pseudo

[nodes]
; Note, if you are using automatic update for allstar link nodes,
; no allstar link nodes should be defined here. Only place a definition
; for your local nodes, and private (off of allstar link) nodes here.

1000 = radio@127.0.0.1
<https://us-mg6.mail.yahoo.com/compose?to=radio@127.0.0.1>:4568/1000,NONE
; This must be changed to your node number
1001 = radio@10.0.0.201
<https://us-mg6.mail.yahoo.com/compose?to=radio@10.0.0.201>:4569/1001,NONE
; and iax port number if not the default

RPI3 #2

rxchannel = dahdi/pseudo

[nodes]
; Note, if you are using automatic update for allstar link nodes,
; no allstar link nodes should be defined here. Only place a definition
; for your local nodes, and private (off of allstar link) nodes here.

1000 = radio@10.0.0.201
<https://us-mg6.mail.yahoo.com/compose?to=radio@10.0.0.201>:4568/1000,NONE
; This must be changed to your node number
1001 = radio@127.0.0.1
<https://us-mg6.mail.yahoo.com/compose?to=radio@127.0.0.1>:4569/1001,NONE
; and iax port number if not the default


I am not having any results with this. I did not uncomment node register
line in iax.conf for either server
and also in rpt,conf I did not uncomment the status report lines

I just simply want these two servers to talk to each other on the same lan

The nodes in both of these servers are HUBS.
Anyone have any ideas I have over looked?

Ron Simpson,
N6GKJ Amateur Radio
...................


Have you ever noticed that when you are looking for something,
it is always found in the last place you look?
Ron Simpson,
N6GKJ....
Amateur Radio
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20160902/1f40f1b5/attachment-0001.html>

------------------------------

Message: 3
Date: Fri, 2 Sep 2016 14:45:43 -0400
From: Corey Dean <n3fe@repeater.net>
To: N6GKJ Land <n6gkj1@gmail.com>
Cc: App RPT Users <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Private nodes not connecting
Message-ID: <23CED29E-BF1A-4A70-A4B3-0FE5709F0FC1@repeater.net>
Content-Type: text/plain; charset="us-ascii"

You have to define each node in the other node.  Once I am back to my office I will send you an example of someone does t beat me to it

Sent from my iPhone

> On Sep 2, 2016, at 2:23 PM, N6GKJ Land <n6gkj1@gmail.com> wrote:
>
> Hi guys,
>
> I have 2 RPI 3 servers running the latest N4IRS release. I have a private node on each server.
>
> RPI3 #1 is 10.0.0.200 NODE 1000:4568
> RPI3 #2 is 10.0.0.201 NODE 1001:4569
>
> Neither node can connect to the other. I am using the CLI inside the asterisk program to manually connect using
> rpt fun 1000 *31001 from server 1
>
> or
>
> rpt fun 1001 *31000 from server 2
>
> Listed here is how the scripts are defined.
>
> extensions.conf
> RPI3 #1
> [globals]
> HOMENPA = 209 ; change this to your Area Code
> NODE = 1000   ; change this to your node number
>
> [default]
>
> exten => i,1,Hangup
>
> RPI3 #2
> [globals]
> HOMENPA = 209 ; change this to your Area Code
> NODE = 1001   ; change this to your node number
>
> [default]
>
> exten => i,1,Hangup
>
> [radio-secure]
> exten => ${NODE},1,rpt,${NODE}
>
> [radio-secure]
> exten => ${NODE},1,rpt,${NODE}
>
>
> rpt.conf
>
> RPI3 #1
> rxchannel = dahdi/pseudo
>
> [nodes]
> ; Note, if you are using automatic update for allstar link nodes,
> ; no allstar link nodes should be defined here. Only place a definition
> ; for your local nodes, and private (off of allstar link) nodes here.
>
> 1000 = radio@127.0.0.1:4568/1000,NONE    ; This must be changed to your node number
> 1001 = radio@10.0.0.201:4569/1001,NONE  ; and iax port number if not the default
>
> RPI3 #2
>
> rxchannel = dahdi/pseudo
>
> [nodes]
> ; Note, if you are using automatic update for allstar link nodes,
> ; no allstar link nodes should be defined here. Only place a definition
> ; for your local nodes, and private (off of allstar link) nodes here.
>
> 1000 = radio@10.0.0.201:4568/1000,NONE    ; This must be changed to your node number
> 1001 = radio@127.0.0.1:4569/1001,NONE  ; and iax port number if not the default
>
>
> I am not having any results with this. I did not uncomment node register line in iax.conf for either server
> and also in rpt,conf I did not uncomment the status report lines
>
> I just simply want these two servers to talk to each other on the same lan
>
> The nodes in both of these servers are HUBS.
> Anyone have any ideas I have over looked?
>
> Ron Simpson,
> N6GKJ Amateur Radio
> ...................
>
>
> Have you ever noticed that when you are looking for something,
> it is always found in the last place you look?
> Ron Simpson,
> N6GKJ....
> Amateur Radio
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20160902/a7a7a0b0/attachment-0001.html>

------------------------------

Message: 4
Date: Fri, 2 Sep 2016 14:49:25 -0400
From: Steve Zingman <szingman@msgstor.com>
To: N6GKJ Land <n6gkj1@gmail.com>, App RPT Users
        <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Private nodes not connecting
Message-ID: <1bf49de9-e665-0ce5-2c58-4641ce19cb96@msgstor.com>
Content-Type: text/plain; charset="windows-1252"; Format="flowed"

Ron,
set debug:
rpt debug level 7

rpt fun 1000 *31001 from server 1
or
rpt fun 1001 *31000 from server 2

What is the output?

--
"Just say no to world domination"

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20160902/f69214f4/attachment.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 91, Issue 5
********************************************