Hi Adi
I would like to connect my allstar node to a Svxreflector network.
At my station, I have a PI connected to a Svxreflector network and a second PI running allstar node.
I want to interconnect them or at least provide DTMF for Svxreflector to connect to allstar.
vy 73's
Rachid
3B8FP
Hi Rachid,
Am 12.05.19 um 19:59 schrieb Rachid Karroo:
>
> PORT=5301 <---- Can be either 5300, or 5301, or 5302
>
> Is it possible to change the Echolink Port value 5200 to 5300 thus may
> be allow connection to SVX reflector using the Echolink module
> AllStarLink ?
No, since the protocol of tcp-port 5200 (classic EchoLink) is different
from the Svxreflector's protocol. Please could you figure out your
intention. SvxLink supports EchoLink and app_rpt as far as I know too,
you want to connect an allstar node to a SvxReflector network?
vy 73s de Adi / DL1HRC
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.