That not true works great, have two in the field at repeater sites.

https://www.dropbox.com/s/05mdzjuqz87xi78/20180626_100527.jpg?dl=0

-------- Original message --------
From: Sean McCarthy <smccarthy61@gmail.com>
Date: 8/4/18 12:00 PM (GMT-06:00)
To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org>
Subject: Re: [App_rpt-users] UPS for a PI 3 B+

I read that this board will not recharge the batteries without physical intervention, i.e. pressing the switch, after a power failure. this would make if fine unless you want unattended operation.

On Sat, Aug 4, 2018 at 8:24 AM, David <david@kg5rdf.com> wrote:
This one works:

https://www.amazon.com/dp/B01MQYX4UX?ref=yo_pop_ma_swf


-------- Original message --------
From: Ramesh Dhami <Ramesh@va3uv.com>
Date: 8/4/18 7:03 AM (GMT-06:00)
Subject: [App_rpt-users] UPS for a PI 3 B+

Hi All:

This topic comes up from time-to-time!

Does anyone have experience with the following UPS HAT:

http://www.pimodulescart.com/shop/item.aspx?itemid=50

The ordering options seems to be a little confusing!

Additionally, what I am looking for is:

1.  Does this fully restore power once the battery has been discharged
and the AC power is restored? - i.e., no buttons to press (my
application is in an unattended / remote location)

2.  Is this the s/w that I need to install:
https://github.com/modmypi/PiModules/wiki/UPS-PIco-Installation -> Any
incompatibility / will it break a DIAL install?


Thanks,

Ramesh.

VA3UV / KN4RSD

#27919 (and others!)



_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.