set up a hub node (use Zap/pseudo instead of Radio/usbxxxxx in your rpt.conf file for the rxchannel value) and connect your nodes to the hub.

easy peasy lemon squeezy

--
Bryan
Sent from my iPhone 5...No electrons were harmed in the sending of this message.



On Dec 16, 2014, at 10:40, Mike M <kf7mbk@w7ara.net> wrote:

I have set up an allstar system with 5 private nodes (soon to be 7).

I can link the individual nodes to one another, or say 4 of the nodes
to the 5th, but is there a better way?  I was looking at ConfBridge
but couldn't get it to work.. not even sure it would work.

I tried several things (I'm still learning) but I made an entry under
[radio-secure]
exten => 1000,1,ConfBridge(101)

I was hoping to be able to do *31000 and connect to the bridge.  But
it did nothing.

I just want to be able to have multiple bridges and be free to connect
any node to any bridge.  If I connect all the nodes to a single node,
I can no longer take that single node and connected it to something
else without disconnecting all the other nodes connected to it.

Just not sure what the norm is...if there is one.

Thanks
-Mike
KF7MBK
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.