I think I have it solved. I was missing duplex=1 in rpt.conf and I had ctcssfrom=no in my usbradio.conf.  My goal is to have this radio (a GM300 VHF) set up as remote base.  I think it is working now, although this new ham is having a hard time understanding how ctcss is works with the URI when I am or could be changing to different repeaters on the radio.  That is why I had turned it off, I thought "I'll let the radio handle CTCSS."  

Thanks for everyone who reached out to me.


Doug
KI7DQG

On Tue, Aug 23, 2016 at 9:25 PM Bob Pyke <k6ecm1@gmail.com> wrote:
May I assume this is a simplex node? if so, do you have "duplex=" set correctly in rpt.conf (=1) and simpleusb.conf or usbradio.conf (=0), whichever you are using?

See http://docs.allstarlink.org/drupal/node/30 and https://allstarlink.org/usbradio.html

Thanks,
Bob
k6ecm
73

Sent from iPad


> On Aug 23, 2016, at 6:00 PM, Doug Fessler <ki7dqg@gmail.com> wrote:
>
> Hi,
>
> I have a Pi3 that I am interfacing with a URI. In my experimenting, something happened and the URI now sends the courtesy tone every 3 seconds. When the cable/radio is hooked up, it constantly transmits (radio gets hot!). So, I disconnected the radio and rebooted the node (several times)... same thing.  It keeps sending the courtesy tone.
>
> Anyone seen this or have a pointer for me?
>
>
> Thanks,
>
> Doug
> KI7DQG
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.