Hey David,
Thanks for your response.  I tried this:

06 = 53.720,136.5,1000,h-t

When I call it up, it still splits to 0.5 mhz (53.220).  Made sure I rebooted the node as well.  So for grins I tried this:

06 = 53.720,136.5,2000,h-t

Still it transmits at 53.220 instead of 52.720.


Monty


On Wed, Dec 7, 2011 at 9:26 AM, David KE6UPI <dshaw@ke6upi.com> wrote:
Check out this webpage.

http://ohnosec.org/drupal/node/175

You may also specify the offset in a memory channel
by adding an additional parameter before the options,
for example:

01 = 147.435,103.5,1035,h-t  ; This would be for W6NUT in Los Angeles with input of 146.40
David

On Sun, Dec 4, 2011 at 2:37 PM, Monty <monty@ke7jvx.com> wrote:
Hello Everyone,
I have successfully integrated a Low Band Syntor X with an Xcat to app_rpt using CI-V.  I have a problem though.  There are currently 6 6m repeaters here in Arizona, 3 have 0.5 mhz split and the other 3 have 1 mhz splits.  I have only been successful in programing the 0.5 split frequencies in App_Rpt memories.  Is there a trick to make it split to 1 mhz or is that not possible?

Monty

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users