In rpt.conf you have to put the IP address and port of the other node(s) in your private network. Not sure I have your IPs right but...

One node would look something like this:

[nodes]

; Note, if you are using automatic update for allstar link nodes,

; no allstar link nodes should be defined here. Only place a definition

; for your local nodes, and private (off of allstar link) nodes here.

1200 = radio@127.0.0.1:4570/1200,NONE                  ; Local node

1003 = radio@10.205.1.25:4570/1003,NONE                ; Remote Node

The other node like this:

[nodes]

; Note, if you are using automatic update for allstar link nodes,

; no allstar link nodes should be defined here. Only place a definition

; for your local nodes, and private (off of allstar link) nodes here.

1003 = radio@127.0.0.1:4570/1003,NONE                   ; Local Node

1200 = radio@10.204.2.7:4570/1200,NONE                  ; Remote node

Hope that helps you get some sleep :-)

--
Tim
:wq

On Jan 27, 2015, at 3:53 PM, Serge Bérubé <ve2abc@ve2abc.com> wrote:

HI ! ,

               I have trouble connecting private nodes across routers . We have nodes 1003 and node 1200  , each on a different router on an intranet  linked with many Ubiquiti radios on 5 ghz band. We use WDS  on all radios , and the routers are Mikrotik RB-750 and Rb-2011 all updated to the latest firmware ( 6.25) from both locations we could ping  the remote Asterisk machine and we can SSH or WEBMIN in it, no issues ! I am using port UDP 4570 on both, I am sure about my DST rules  in routers , and my routes are declared. So I can pass traffic  from one lan to the other with no issues. I f I check with SSH while I try to connect from the remote node, I could see a WARNING [2421] app_rpt.c:17811 rpt_exec; Node 1200 IP 10.204.2.7 does not match link Ip 10.205.1.25!!     .  What it means for me is that the machine received an answer to the connect request  with the router`s  physical L3 address of the used port instead of the address of the Asterisk remote box…

Such is a router ! it packs the info with the source address of the router… Is there a location in Asterisk where we could  instruct the machine to listen to any address ? or may be someone knows a workaround… I worked around 150 hours to  resolve this issue , with no success .  Help me please, I do not sleep since many nights !

 

Thanks for your help, Serge VE2ABC  tech. director  aresqc.org

 

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.