Hello,

I am unable to get any ctcss to be encoded during transmit, except for the tone frequency that's entered in to the txctcssdetault field.  If I change that tone, the new value gets transmitted.  However, all of the other tones in the txctcssfreqs are being ignored.  However, I do know that the rxctcssfreqs values are being decoded.  If I transmit in to the repeater using a tone not listed, or without a tone, app_rpt ignores it and does not repeat and key up the transmitter.  Any assistance is greatly appreciated.  Thanks in advance!

Here's what's in my usbradio.conf

[usb]

hdwtype=0
rxboost=1
txboost=1
rxctcssrelax=1
txctcssdefault=151.4
rxctcssfreqs=146.2,141.3,151.4
txctcssfreqs=146.2,141.3,151.4
;rxctcssoverride=0
carrierfrom=usb
ctcssfrom=dsp
rxdemod=flat
txprelim=yes
txlimonly=no
txtoctype=phase
txmixa=composite
txmixb=0
invertptt=0
duplex=1
rxondelay=0
rxnoisefiltype=0
eeprom=0