Ok, so here is the latest.

I discovered that the port # (which I did change earlier) is not updating on the rpt_extnodes file. It still shows 14569.

On the local node 27976, it does show the correct node port # as registered in the rpt_extnodes file, so I went ant took another one my nodes and try to see what it shows and it also shows the wrong port #.

So I think there is something going on with the allstar server.

Unless I am missing something here, I think this might require Jim or an admin to take a look?

Or does this only update every few hours now? I thought it was like every 15 minutes or so? But I would have thought that upon registration, the file on the allstar server would update immediately and then all the nodes would grab the file every 15-30 minutes or so.. If someone could confirm. Thanks

27976=radio@63.231.96.56:14569/27976,63.231.96.56

Should be: 27976=radio@63.231.96.56:4569/27976,63.231.96.56

On the affected now, 27976:

asterisk -rx 'iax2 show registry'; ll /var/lib/asterisk

Host dnsmgr Username Perceived Refresh State

67.215.233.178:4569 N 27976 63.231.96.56:4569 60 Registered

KA4EPS