Date: Tue, 27 Jan 2015 15:18:09 -0500
From: szingman@msgstor.com
To: Bryan@bryanfields.net; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] compile on Debian
From what I see in chan_dahdi.c zapata.conf is replaced by
chan_dahdi.conf
On 1/27/2015 3:07 PM, Bryan Fields
wrote:
My understanding is that Dahdi
replaces zaptel on the new kernels. If you read the docs on
Dahdi it says to remove all zaptel stuff.
On 1/27/15, 2:50 PM, Steve Zingman wrote:
I would put the files in anyway. Zaptel or not unless there is a
dahdi version the kernel module may still be looking for the
file.
On 1/27/2015 2:35 PM, Bryan Fields
wrote:
No, this is a 3.2 kernel (needed it for the server) so it's
dahdi, my old box is running the old stable debian, and its
the zaptel drivers which work.
I'll update in a few once I get in front of a pc
On January 27, 2015 2:19:24 PM EST,
Steve Zingman
<szingman@msgstor.com>
wrote:
The node I am running a PCI card is
still Squeeze, so it's zaptel but,
Are the config files for the PCI card installed?
zapata.conf in /etc/asterisk
zaptel.conf in /etc
also try to add "options pciradio debug=1" in
/etc/modprobe.conf
longshot, but worth asking.
Steve
On 1/27/2015 2:08 PM, Bryan
Fields wrote:
Pciradio. I am going to write a longer bug
report once I pull it into gdb later today
On January 27, 2015 2:00:59 PM
EST, Steve Zingman
<szingman@msgstor.com>
wrote:
Bryan,
Do you get the crash when you start dahdi or when you modprobe pciradio?
Steve
On 1/27/2015 9:51 AM, app_rpt-users-request@ohnosec.org wrote:
Message: 2
Date: Tue, 27 Jan 2015 03:38:27 -0500
From: Bryan Fields<Bryan@bryanfields.net>
To:"app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] compile on debian (was More than 4 nodes
on a PC)
Message-ID:<54C74E83.60203@bryanfields.net>
Content-Type: text/plain; charset=ISO-8859-1
On 1/27/15, 1:04 AM, Doug Crompton wrote:
Bryan,
Yes you will need Dahdi source. You need to remove Zaptel stuff. I would
suggest getting it from the BBB image at hamvoip.org. It already has the
Allstar patches in it. It is located in
/usr/src/utils/dahdi-linux-complete-2.9.1.1+2.9.1 If not you need to
download that version of the code from Digium and apply the patches from the
Allstar svn site.
I've got Dahdi from Digium (dahdi-linux-complete-2.10.0.1+2.10.0.1) and
applied the patches from ohnosec svn. hunk 3 on patch 2 needed to be applied
by hand, the rest went fine.
Dahdi is compiled and installed.
I have the ohnosec svn asterisk compiled as well. Copied the sounds in place
and started to configure asterisk.
I've run into a bit of a problem while loading the
pciradio module however.
I don't know enough about kernel coding in linux to know where to begin
debugging this.
does your version of dahdi on the hamvoip.org site work ok? perhaps it's new
bug in the Digium code, and I should go with yours in place of it.
--
Bryan Fields
727-409-1194
http://bryanfields.net
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
--
Bryan Fields
727-409-1194
http://bryanfields.net
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
--
Bryan Fields
727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.