OK here's what happens.....
rpt.conf Duplex=1
Any signals going from App_rpt to the radio get recorded. A WAV file gets created in the archive directory and the outgoing audio is recorded.
Any signals that come in on the radio, going towards App_rpt do not get recorded. A WAV file gets created but when played back there is no audio.
rpt.conf Duplex=3
Is the same.
I think the duplex setting in usbradio.conf will make the setup record audio in both directions if full duplex is set to 1 but I cant operate the system in full duplex here as previously described.
Thanks for your help guys,
Matt
G4RKY
2009/8/22 Stephen Rodgers
<sales@qrvc.com>
Matt Beasant wrote:
> Hi,
> I would like to monitor the activity on my link by using the function
> provided in app_rpt to record to the HDD.
>
> However, I am only able to record one half of the conversation.
>
> This node has a simplex radio connecting to a repeater via the repeater
> pair, so is not operating in full duplex mode.
>
> Is there anything I can do to be able to record both sides of the
> conversation?
>
> Many thanks,
>
> Matt
> G4RKY
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
This may be broken on simplex nodes. Please reverify it still works in
duplex mode by setting duplex=2 and temporarily opening the PTT line to
the transmitter on your simplex radio.
Steve
WA6ZFT