Why yes...

chan_usbradio was, from the beginning, designed to do exactly that.

You can give it a list of CTCSS tones for receive, and corresponding tones for TX.

You must also specify a 'default' tx tone (if there is no input).

Jim

From: app_rpt-users-bounces@ohnosec.org <app_rpt-users-bounces@ohnosec.org> on behalf of Joe Moskalski <kc2irv@gmail.com>
Sent: Friday, July 22, 2016 8:29 AM
To: app_rpt mailing list
Subject: [App_rpt-users] Shared repeater tone panel

I have a need to setup a community repeater. This is done easily with a shared repeater tone panel and the like from CSI. I was wondering if this could be accomplished using app_rpt. All it would need to do is allow the use of multiple input and output PL tones. Simply put, when the repeater receives X pl tone it transmits the X pl tone on the output and when the repeater receives Y pl tone it transmits the Y pl tone on the output.

If anyone has done this or has any idea on how this would be accomplished it would be much appreciated.

Thanks in advance!