Well, yes, in a simulcast system, the transmitting equipment must be effectively
IDENTICAL (same equipment carefully adjusted accordingly).

However, I'm not sure why you are attempting this, as the Voter Board/RTCM as it currently
is released/shipped does not properly support phase-coherent simulcast. Its
software does (well, is capable of, if enabled). Its hardware does not.

Date: Mon, 14 Jul 2014 11:08:13 +1200
Subject: Re: [App_rpt-users] VOTER transmit phase management
From: stevewrightnz@gmail.com
To: telesistant@hotmail.com

Yes. I suppose RX is little different, but I wondered to what extent transmit phase was critical, and how it might be worked around by inserting some phase pre-correction phasing line might be inserted in the feedline, or at the simplest - varying feedline length.

On Mon, Jul 14, 2014 at 11:05 AM, Jim Duuuude <telesistant@hotmail.com> wrote:

Are you talking about simulcast transmit?

Jim, WB6NIL

Date: Mon, 14 Jul 2014 10:34:12 +1200
From: stevewrightnz@gmail.com
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] VOTER transmit phase management

On RTCM/VOTER systems, does the transmit audio and/or RF phase have to be "fiddled" to manage varying types of hardware? I read somewhere that the RF gear should be similar or identical to minimise timing issues.

Can someone shed some light on this?

regards,
Steve ZL1BHD

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

Meshnetworks - Rangitaiki Plains Rural Broadband Internet Providers

+64 21 040 5067