Stupid Question:
Were you able to ping it by hostname and not just the ip address?

I realize this might be what you were doing anyway.
And sorry to report I don’t have any nodes of my own online at this time.
We just moved to a new office and a new home.
All my goodies are in piles.
L

Otherwise I would have tested yesterday.

Steve Gladden

Michigan Broadband Systems

Connecting Your Business!

+1 734.527.7150 Direct
+1 248.327.4389 Fax
steve@michiganbroadband.com

www.michiganbroadband.com

From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Gladden
Sent: Thursday, September 13, 2012 8:17 AM
To: Jim W7RY; Chuck Henderson; telesistant@hotmail.com
Cc: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Same Old Problem With Node

Server may be running low on authentication sauce.
Was anyone else having problems?

//Sent from my mobile handheld Star Trek Communicator//

-----Original message-----

From: Jim W7RY <w7ry@centurytel.net>
To: Chuck Henderson <rpt2@chuck.midlandsnetworking.com>, Jim Duuuude <telesistant@hotmail.com>
Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Sent: Wed, Sep 12, 2012 20:22:24 GMT+00:00
Subject: Re: [App_rpt-users] Same Old Problem With Node

So why wont my node register after sitting for 4 hours after a reboot??? And being able to ping the registration server? And the node being on the DMZ of my router?

Jim W7RY

64 bytes from 67.215.233.178: icmp_seq=1 ttl=54 time=62.0 ms

64 bytes from 67.215.233.178: icmp_seq=2 ttl=54 time=34.6 ms

64 bytes from 67.215.233.178: icmp_seq=3 ttl=54 time=34.3 ms

--- 67.215.233.178 ping statistics ---

3 packets transmitted, 3 received, 0% packet loss, time 1999ms

rtt min/avg/max/mdev = 34.345/43.700/62.085/13.000 ms

[root@w7ry ~]# asterisk -r

Created by Mark Spencer <markster@digium.com>

Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.

This is free software, with components licensed under the GNU General Public

License version 2 and other licenses; you are welcome to redistribute it under

certain conditions. Type 'core show license' for details.

=========================================================================

Connected to Asterisk currently running on w7ry (pid = 2125)

Verbosity is at least 3

w7ry*CLI> iax2 show registry

Host dnsmgr Username Perceived Refresh State

67.215.233.178:4569 N 28238 <Unregistered> 60 Timeout

w7ry*CLI>

From: Jim W7RY

Sent: Wednesday, September 12, 2012 7:10 AM

To: Chuck Henderson ; Jim Duuuude

Cc: app_rpt-users@ohnosec.org

Subject: Re: [App_rpt-users] Same Old Problem With Node

Continuing problem. Node will not register. Any ideas? And yes, all of the passwords are correct. I’ll reboot and see if this helps.

Duuuude... Any ideas.

w7ry*CLI> iax2 show registry

Host dnsmgr Username Perceived Refresh State

67.215.233.178:4569 N 28238 <Unregistered> 60 Timeout

Thanks!

Jim W7RY

From: Chuck Henderson

Sent: Friday, September 07, 2012 1:47 AM

To: Jim W7RY ; Jim Duuuude

Cc: app_rpt-users@ohnosec.org

Subject: Re: [App_rpt-users] Same Old Problem With Node

Your config files seem okay. Your system seems to have good connectivity. Your udp 4569 inbound is working fine. But your system is not registering with 67.215.233.178:4569 as it needs to.

w7ry*CLI> iax2 show registry

Host dnsmgr Username Perceived Refresh State

67.215.233.178:4569 N 28238 <Unregistered> 60 Request Sent

The system is not registered, this may be due to having a wrong password in the iax.conf file.

re-verify the password (number)

node

node configuration

YourServerName

Node: 28238

Make sure the password shown here is the same as configured in the iax.conf file.

If the password numbers match, which I think they do, then there must be a problem with the registration server relating to your node.

Jim Duuuude might need to take a look at this because if you are not registered then you will not be able to download the list of nodes and your node will not be included in the list that other nodes download. This will prevent connectivity to other nodes from working.

One other thing. I noticed you are running version 0.287 08/26/2011, I am running version 0.304 05/09/2012.

I don't think this would cause this problem but you should probably upgrade to the latest version.

Chuck

On Fri, Sep 7, 2012 at 12:03 AM, Jim W7RY <w7ry@centurytel.net> wrote:

Same old problem. Even after a reboot.

Does anyone have any ideas?

Thanks

Jim W7RY

w7ry*CLI> rpt fun 28238 *832560