In that regard RTCM are no different than any other interface. So yes, for each node you need the loopback entry in the [nodes] section for each node. You also must add the node to extensions.conf and iax.conf. A trick I use is to grep the original node number to find each place it occurs then I know what to add.  i.e. grep 1999 *
 
Also remember that multiple RTCMs can be on the same node, usually in a voting/simulcast environment but that could happen with mix clients too. Just depends how you want to hang the system together. 
--
Tim
:wq

On Aug 11, 2013, at 7:27 PM, stephen gebhard <stevegebhard@cox.net> wrote:

 
Hello group.  I have a local RTCM server running 3 thin clients along with a URI node, all working great except for one thing, I cannot connect the thin clients together.  In the nodes stanza of rpt.conf I have the node numbers listed with the loopback address as I thought they should be, but when I try connecting them together I get the auto-congest slow response error, which tells me it cannot find the node.  Is this correct to set the RTCM node numbers to the loopback address?  Should I be entering something else there or comment out?
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users