OK I now have it working for me.
The bindport in IAX.conf needed to be changed to 4570 and then server info on the Allstar portal also needed to be changed.

Thanks to Brian for the missing piece of info. The last time I had to do this was when there was no portal config.

Jon VA3RQ

have you changed the port you use AT the portal? ie the server configuration, network configuration tab?

if you have a node that needs to be on a different port, the underlying server needs to be moved both at the end, as well as at the mother ship.

had the same problem until i had everything lined up.

--
Bryan

Sent from my iPhone 5

please forgive misspellings...

On 10/12/2012 11:31 AM, George Csahanin wrote:

On my node 28599 here's where I had to make mods to reflect using port 4570:

root@nat:/etc/asterisk# grep 4570 *
iax.conf:bindport=4570
iax_rpt_custom.conf:bindport=4570
root@nat:/etc/asterisk#

There are no ports indicated in rpt.conf.

It all works fine, others can connect, and webtransceiver works fine.

I also do not use portal configuration as it won't let me ser CW ID at 30 WPM

GeorgeC

----- Original Message -----

From: Robert Poff

To: app_rpt-users@ohnosec.org

Sent: Friday, October 12, 2012 8:32 AM

Subject: Re: [App_rpt-users] Alternate IAX port >> bind port not working

Just for drill... if you move into /etc/asterisk and do "fgrep 4569 *" and "fgrep 4570 *".
What do get back?

Here's what I see with my alternate port 4565 (on XIPAR) :
iax_general_custom.conf:bindport=4565
rpt.conf:28695 = radio@127.0.0.1:4565/28695,NONE ;KVHF 10m Receiver - ME
rpt.conf:12958 = radio@209.213.169.196:4565/12958,NONE ;KVHF 10m Transmitter

--
Robert A. Poff
Loganville, PA

S/V Loon
1983 Hunter 34
Havre de Grace, MD.

WB3AWJ - Allstar 27784
Powered by Linux
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users