Tom,
A couple of questions.
Please post the results of the following command:
lsusb

Which RPi image did you install?
Which channel driver are you using?

I have a RPi3 on the bench now running the latest release candidate. 2 URI running the chan_usbradio channel driver.
I'll have more questions.

Steve N4IRS


On 04/22/2017 04:33 PM, Thomas D. Cooney, Jr. wrote:

I have a dual node running two Repeater Builder RIMS with DIAL on a Pi 3 board. 

 

When I plug in the second RIM, it fails to initialize and stops comms with the first RIM.  Heartbeat on RIM #1 becomes erratic then stays steady on.

 

I am new to the list board, and have not seen prior posts.  Thought I likely had a configuration problem, but Scott N3XCC indicates that others are having similar issues.

 

Info links, or copies of prior related posts would be appreciated.  TNX

 

Tom Cooney, Jr., W3SF

tom@cooneyjr.com

Home: (814)626-1531

Cell: (814)931-0060

 



_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.