Hello Again,

To get correct results - doesn't it make more sense to wire up this:

http://www.dmkeng.com/images/URIx_TEST_FIXTURE.pdf

From the above - how does AIN (pin 24) work?

73's,

John

AJ6BC

On Wed, Aug 12, 2015 at 10:39 PM, John C. Westmoreland, P.E. <john@westmorelandengineering.com> wrote:

Hello All,

Here is the wiring instructions from the FAQ:

Pin 1 to Pin 7

Pin 2 to Pin 3

Pin 4 to Pin 8

Pin 23 to Pin 24

10K Resistor between Pins 21 and 22

10K Resistor between Pins 21 and 23

For URIx (CM119) only, also include the following connections:

Pin 5 to Pin 10

Pin 6 to Pin 11

From uridiag:

Enter your selection:c

Special Test Cable Pinout:

25 pin D-shell connector

  Pin 1 to Pin 7

  Pin 2 to Pin 3

  Pin 4 to Pin 8

  Pin 11 to Pin 24

  10K Resistor between Pins 21 & 22

  10K Resistor between Pins 21 & 23

  For URIx (CM119), also include the following:

  Pin 5 to Pin 10

  Pin 6 to Pin 11

  Do *NOT* include these for the standard URI!!

So, which one of these do I use?

73's,

John

AJ6BC

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.