Here is my usual trouble shooting list with Echolink..

1. Make sure all ports are port forwarded correctly 
UDP to ports 5198 and 5199
TCP to port 5200

I always  Create a Static ip on my unit inside the network that the repeater is running through and usually if possible I leave the repeater side as static and set the static ip from the modem or Router example 192.168.0.100 or 10.10.10.100 some thing like that. After setting this ip i then port forward the appropriate ports needed for allstar and echolink.

http://www.echolink.org/firewall_solutions.htm

2. Make sure you Echolink.conf file is correct
[el0]
confmode=no
call=W6ABC-R	; Change this!
pwd=XXXXX	; Change this!
name=Asterisk-EL-channel-driver ; Change this to your real name!
qth=Asterisk-EL-channel-driver ; Change this to your actual QTH!
email=foo@bar.com ; Change this!
maxstns=20
rtcptimeout=10
node=123456 ; Change this!
recfile=/tmp/recorded.gsm
astnode=2345 ; Change this to your active Allstar node number!
context=radio-secure
server1=server1.echolink.org
server2=server2.echolink.org
server3=server3.echolink.org
freq=145.000 ; Freq in MHz
tone=100.0  ; CTCSS Tone (0 for none)
lat=34.74978  ; Latitude in decimal degrees
lon=-92.27666 ; Longitude in decimal degrees
power=0  ; 0=0W, 1=1W, 2=4W,  3=9W, 4=16W, 5=25W, 6=36W,  7=49W,  8=64W,  9=81W  (Power in Watts)
height=0 ; 0=10' ,1=20',2=40',3=80' ,4=160' ,5=320' ,6=640' ,7=1280',8=2560',9=5120' (AMSL in Feet)
gain=7 ; Gain in db (0-9)
dir=0 ; 0=omni, 1=45deg, 2=90deg, 3=135deg, 4=180deg, 5=225deg, 6=270deg, 7=315deg, 8=360deg (Direction)

http://ohnosec.org/drupal/node/56

Let me know if you need more direct help i will try to do my best to answer by the way ports for allstar default ssh 222 and 4569 is the defaults for the allstar public side you might need to open up 5060 and 5038 depending on what all your trying to accomplish keep in mind one should never and i repeat NEVER DMZ any allstar box this will lead you wide open for attacks and possibly leave you vulnerable to hackers I LEARNED THE HARD WAY!!!!

Trust me they will try to do anything to make free phone calls..

73's for now 


On Thu, Jun 4, 2015 at 10:47 AM, Jamey Wright <Jamey.Wright@morgan911.org> wrote:

I have the Echolink Driver installed, configured, and working.  When I go to the Echolink website to verify, I can find it on this page http://echolink.org/logins.jsp but not on this page  http://echolink.org/links.jsp?title=&d=2&sel=all&lat_fix=&lon_fix=&lat_deg=&lat_min=&lat_NS=&lon_deg=&lon_min=&lon_EW=&gs=&offset=1800

 

Is this an error in my echolin.conf file or is it an issue on Echolink’s side?

 

Thanks

 

Jamey

WR4JW

 


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.