; Configuration for app_gps
;
[general]

call = wb9uus-2   ; callsign (including SSID) for APRS purposes
password = 12345 ; Password for APRS-IS server for above callsign
comment = AllStar Node 27468 ; Text to be displayed associated with this station
server = second.aprs.net  ; APRS-IS server to report information to
port = 10151 ; port on server to send data
icon = r  ; A CAR (default)   Icon do be displayed for station on APRS display (see below)
comport = /dev/ttyS0  ; Serial port for GPS receiver (specify this only if using GPS receiver)
baudrate = 4800  ; Baud rate for GPS receiver (specify this only if using GPS receiver)
;debug = y ; set this for debug output
freq=442.700  ; Display Frequency of station
tone=107.2    ; CTCSS tone of station (0.0 for none)
lat=40.508    ; Fixed (default) latitude in decimal degrees
lon=-88.988   ; Fixed (default) longitude in decimal degrees
elev=123.4    ; Elevation of Antenna in Meters (*NOT* HAAT)
power=9       ; Power level (see below)
height=5      ; Antenna Height in HAAT (see below)
gain=8        ; Antenna Gain (see below)
dir=0         ; Antenna Direction (see below)

On Sat, Jan 22, 2011 at 10:30 PM, Jim Duuuude <telesistant@hotmail.com> wrote:

There have (obviously) been some changes/improvements made to the
Echolink and APRS/GPS subsystems within app_rpt.

Included in these is the ability for a node to report its "fixed" GPS coordinates
to the APRS network, even if it does not have a GPS receiver connected.

Please see the following:

Setting up Echolink Connectivity
http://209.159.155.200/drupal/node/56

Setting Up APRS and GPS Configuration
http://209.159.155.200/drupal/node/179

Of course, the latest copies of app_gps and chan_echolink need to be
downloaded from the SVN.

JIM WB6NIL