I am running 2 nodes 1994 and 1996 on this server with programed as below cw Id is good on mode 1996 not good on 1994 if I change the node number [morse1996] to [morse1994] the problem reverses to the other node.Does this file need to be duplicated for both nodes?
; Morse code parameters, these are common to all repeaters.
;
[morse1996]
speed=20
frequency=800
amplitude=4096
idfrequency=750
idamplitude=1024
--
Thanks Stan Siems
WB0EMJ
The difficult we do right away the impossible just takes a little longer and the words it can't be done should never be spoken
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rp t-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rp and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"t-users
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.