In rpt.conf,
Under the repeater node stanza:
;discpgm=yourdisconnectprogram
;lnkactenable=0
;lnkacttime=1800
;lnkactmacro=*52
;lnkacttimerwarn=30seconds
;remote_inact_timeout=1800
;remote_timeout=3600
nounkeyct=1
;holdofftelem=0
Under the
remote base node stanza, none of this exists.
Jamey
WR4JW
Jamey,
What are your settings for:
remote_inact_timeout
remote_timeout
73, Steve N4IRS
On 11/08/2015 10:18 PM, Jamey Wright
wrote:
I have a 2M remote base (TM-271) running
on a node here. How can I change the activity timeout?
There have been several instances where I have been actively
using the node and I get an activity timeout message. First
it will announce timeout in 180 seconds. If I do anything
like change power level, frequency, etc, it then announces
activity timeout in 3597 seconds, then about 15 seconds
later announces activity timeout in 3604 seconds and
continues to announce activity timeout every 30 seconds or
so. Disconnecting and reconnecting is the only way to stop
the countdown.
Thanks
Jamey
WR4JW
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic