FYI

Setting the |I values to not have a callsign will crash the asterisk app as quick as you press the transmit button the first time,

Settiong totime to 0 will lock out the channel completely with a timeout message that happens immediate upon startup

Just figured I'd try these and pass along the info… So far the telemdefault = 0 is the best approach.

Alan

From: Tim Sawyer [mailto:tim.sawyer@me.com]
Sent: Friday, June 01, 2012 12:20 AM
To: Alan Adamson
Cc: App_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Looking for a hardwired rpt.conf section

duplex = 0         ; Half duplex with no telemetry, courtesy tones or hang time 

linktolink = yes  ; in case whatever you're hooking to likes full duplex

; these attempt to kill IDs but I have no idea if they would work. experiment!

totime=0

idrecording=|i

idtalkover=|i

Can't think of anything else you have to stop at the moment. Maybe others will chime in.

--
Tim
:wq

On May 31, 2012, at 7:47 PM, Alan Adamson wrote:

I want to create a completely tone(s) less connection on a uri.  It’s a hardwired connection that I don't want ID's, announcements, hangtime, CT's etc… Besides using the duplex=0, what else do I need to do to turn all of that off on that node? 

If you have rpt.conf section that you could share it would be appreciated.

Thanks

Alan

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users