----- Original Message -----
Sent: Wednesday, November 13, 2013 8:48
AM
Subject: Re: [App_rpt-users] Advise for
setup
Hi Keith,
Yes the repeater is using
PL but the PL does not drop with the COS/COR. It stays running the whole time
including the squelch tail. This maybe on of the issues.
73 de
Angelo
PS: any configurations files you
would like to share?
----- Original Message -----
Sent: Wednesday, November 13, 2013 8:39
AM
Subject: Re: [App_rpt-users] Advise for
setup
If you are
using PL on the repeater, they maybe some options for you. If you are
not using PL, then you will have to look at options where a shorter squelch
tail is used.
We run similar setups here at some of sites – taking
advantage of PL to give the desired results.
We are using
USBradio.
Keith
On 11/13/13 9:01 AM, "Angelo Glorioso"
<n5uxt@hotmail.com>
wrote:
Good All,
We have a
node coming up in Lake Charles, La and we are having issues. So, I am
asking for configurations suggestion. First off, the Allstar node is
not going to be at the repeater site. It is at a remote
site.
It is running on GM300
with URI interface. The repeater has a long squelch tail of about 2
second. I have tried to run with USB radio in half duplex mode but
the node ends up ping ponging with the repeater in half duplex mode .
Is it better to use
simpleusb or USBradio for this type of setup?? Should the repeater squelch
be reduced or turned off all together.
Please
offer a copy of either USBradio or simpleusb configuratio file pretty
please.
Any help would be
appreciated.
7 3 de
Angelo
_______________________________________________
App_rpt-users
mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
--
keith@goobie.org
Keith Goobie
Richmond
Hill, ON, CANADA
_______________________________________________
App_rpt-users
mailing
list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users