Actually you will hear telemetry if you have the telemetry set to on. So you will hear connect disconnect messages.
Jon RQ

On 7/7/2014 11:39 AM, Skyler Fennell wrote:

Thanks mike, the only problem with this is I can't hear telemetry so I don't know if I actually connected to a node because the telemetry would be silent correct? Is there any way to have conformation that I connected to a node so I don't have to just "hope" that I connected to the node?

On Jul 5, 2014, at 11:39 PM, <mike@midnighteng.com> wrote:

Skyler,

If I understand your problem correctly...

Do the same as the repeater...  tx pl to the input of the repeater only on valid input of your node.

Your node might do a final (at rest) id but without pl from valid input to node, it will not be captured by the rf repeater input.

...mike/kb8jnm

On 7/3/2014 10:50 AM, Skyler F wrote:

I know this is a major problem that has showed up, and I would like to know if anybody knows how to fix it for the best operation.

Thanks for any help, I am a newbie at the software and CentOS ACID is the first time I have used command line.

Background

-There is a remote repeater on a mountain west of me

-No internet exists at the site

-I can't add any other link in because of antenna expenses

-The Rocky Mountain Radio League has held approval for an RF link to the repeater using the input frequency of the repeater

What they will do

-Because of the loonngg hang time, they will disable the TX CTCSS right away after the transmission is done.

-They will NOT TX CTCSS on their CW ID so I don't have to hear that in the node.

What I am expected to do

-Only CW ID when a remote person is transmitting, so when they are coming in from the internet to my node, only ID over their transmission (yes I know the morse will be playing at the same time as the talking)

-NO random ID's coming up 10 mins after the conversation is done. I don't want my node to just come up at random times and ID

Any suggestions, any previous attempts for a link like that?

Thanks so much, and any help would be greatly appreciated. The RMRL wants to start getting this along so I would really like some help.

73's

Skyler KDØWHB

--

Skyler Fennell

amsatnet.info

KDØWHB

electricity440@gmail.com

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.