Be sure to reboot after you change the buffer values to make sure they actually take. I generally run 250 and 1200 and have good results even across the internet.

Assuming your ping test are ICMP you could also test with the Asterisk CLI voter ping [your client] command.

On Wed, Sep 13, 2017 at 4:17 AM, Hayden Honeywood <haydenph91@gmail.com> wrote:

Just hooked up my second site to my VOTER system. The main controller is a Raspberry Pi 3. Port forwarded 667, connection seems to go up fine.

Getting the following error though -
Inbound (Eth Rx) packet out of bounds by: 16000

PING (Grey.Mt): Packets tx: 100, rx: 97, oos: 0, Avg.: 37.598 ms
PING (Grey.Mt): Worst: 40 ms, Best: 37 ms, 97.0% Packets successfully received

No idea why I'm getting packet loss. Rebooted routers...

bulfen is 120 and TX Buffer length is 480. I've tried 960, right up to 1600.

Site has high RF TV transmitters, so maybe getting issues with the GPS there? I can't see it dropping out.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

Tim