rpt fun yournodenumber *xx

and this list should get you going

 

http://app-rpt.qrvc.com/node/21

 

This section contains the suggested prefix digits, mandatory command codes, and suggested command codes for Allstar Link.

Prefix Digit Suggestions

Prefix	Functions
*1	Disconnect Link
*2	Monitor Link
*3	Connect Link
*4	Command Mode
*5	Macros
*6	User Functions
*7	Connection Status
*8	User Functions
*9	User Functions
*0	User Functions
*A	User Functions
*B	User Functions
*C	User Functions
*D	User Functions

Mandatory Command Codes

These are the mandatory command codes which all Allstar Link nodes must support to provide command code consistency to the users.

Command Code	Description
*1node	Disconnect Link
*2node	Connect link in monitor mode
*3node	Connect link in transcieve mode
*4node	Enter command mode on a remote node
*7	Local connection status

Notes

1. node is an Allstar Link node number
2. Node number zero (0) is shorthand for the last node operated on by a previous command
3. Monitor mode means listen to a node, but do not send any audio to it
4. Command mode means send all received DTMF digits to the node number specified (bypassing the local command decoder). Send # to exit command mode, and restore local command decoding.

 

Optional Command Codes

Command Code	Description
*80	Force System ID
*81	Say System Time
*82	Say app_rpt software version
*85	Last active node (system-wide)
*87	System-wide connection status
*51	Disconnect all links (macro)
*52	Site Normal (macro)
*53	Reconnect all links (macro)

 

--
Thanks in Advance

   Bob Brown, WØNQX

   Kansas City Metro Area

   http://sm0kenet.net

   http://byrg.net

   http://kcdstar.byrg.net

Quis custodiet ipsos custodes?

--

On Mon, Jul 26, 2010 at 11:03, Craig Hastings <craig.hastings@gmail.com> wrote:

Does anyone have a list of Command line interface stuff specifically how to control the node from the command line.  I am guessing this would be from the 'asterisk -r' command line.

Say a Link is Up and I want to take it down or put up a link from the command line,  I hunted around and didn't find anything on it,  sorry if its posted already somewhere however I have only looked a few months back in the archives.

Thanks.

Craig

VA3DTF

VE3WOM-L echolink & allstar

_______________________________________________
App_rpt-users mailing list
App_rpt-users@qrvc.com
http://qrvc.com/mailman/listinfo/app_rpt-users