Thanks Bob. I dont think that it has to do with something impossible to do.. In fact I have been searching the archives about problem like that.. And there was some answer about some patch to dahdi zaptel.. or such.. I am at work, dont remember.. 

If it would be installed at least up to a point. I would be able to do it.. 

I just dont know how to tell the compiler not to compile that part and go on..

---

From: kk6ecm@gmail.com
Date: Wed, 10 Sep 2014 09:15:13 -0700
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4

Couple of thoughts. I've not been able to load using ssh.  Last time I attempted this zaptel did not load properly, but it seems I didn't get an error until after the reboot. It seems to me (check the ACID scripts), that ACID disables ssh during the load. When I have loaded CentOS 5.10 (as previously mentioned), I then used some of the ACID scripts to load asterisk, etc, I always had to us a monitor and keyboard on the server to be fully successful. But hey... that could just be my fumbling around.

As for your stated concern. I could be because no one knows the answer. Hard to believe, I know, but it seems to happen occasionally on this list :~}

Thanks,

Bob

kk6ecm

Sent from iPad

On Sep 10, 2014, at 8:30 AM, pete M <petem001@hotmail.com> wrote:

OK, did I asked a question that CAN’T be answered? Or did I asked the wrong way?

 

If I did I am sorry.. And I gave my apology to every one I could have offended..

 

But is it possible to at least have a small word from all those guru here if it can be done, and which way should I go? dont need to have someone holding my hand.. Just need to have a small Idea what to do..

 

Like just point me the pathway.. I will try to do it on my own..

 

Thanks

 

 

 

 

 

 

 

On Sep 9, 2014, at 11:13 AM, pete M <petem001@hotmail.com> wrote:

I cant use the acid.iso cause the computer is in a remote place ( rented server) and they dont supply special OS installation. I can have fedore ubuntu centos on many flavor (x86 or 64 bit) and many revision... The problem is not the loading od the cd are other things like that..

 

I am sure that the kernel is too new and there is a part of zaptel that need a depricated fonction If I am not crazy..

 

 

 

From: kk6ecm

Sent: Tuesday, September 09, 2014 1:40 PM

To: APP RPT

Subject: Re: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4

 

I use this when ACID will not load, usually due to issues with BIOS and network drivers. I was assuming you were not able to get ACID to load on you computer. If your running phase2.sh was a second attempt after trying to load ACID, you may need to check that all the files are there because the load deletes some files. In short, if this occurred during an attempt to load the ACID download, I'd just try it again. 

Thanks,

Bob

kk6ecm

 

Sent from iPad

 

On Sep 9, 2014, at 8:27 AM, pete M <petem001@hotmail.com> wrote:

Ok will try that..

 

thanks!

 

 

From: Bob

Sent: Tuesday, September 09, 2014 10:55 AM

To: 'APP RPT'

Subject: Re: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4

 

I’ve done this several times without issue. Here are the steps I used.

 

Load CentOS 5.10 downloaded from CentOS website

No features, tools only, no desktop (competes with Asterisk)

Set ssh /etc/ssh/sshd_config

Run "setup" at comand line and disable firewall

vi /etc/rc.d/acidrepo

   http://dl.allstarlink.org

Execute portion of ks.cfg, each line at a time

cp /etc/rc.d/rc.local /etc/rc.d/rc.local.orig

cat <<EOF >>/etc/rc.d/rc.local

 

cd /etc/rc.d; rm -f phase1.sh; wget -q http://dl.allstarlink.org/installcd/phase1.sh

 

chmod 755 /etc/rc.d/phase1.sh

 

/etc/rc.d/phase1.sh

Auto reboot after phase1.sh executed

phase2.sh runs automatically to completion

 

Bob

kk6ecm

 

---

From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of pete M
Sent: Tuesday, September 09, 2014 7:00 AM
To: APP RPT
Subject: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4

 

Need help to install an allstarlink node that wont have any radio on it in a data center to be my central reflector for my french network of repeater around Quebec Canada..

 

I did try to run phase2.sh from /etc/rc.d/ but this fail when compiling.

 

here is the out put from the script

 

sh phase2.sh

****** Phase 2 post install ******

Getting asterisk install script from http://dl.allstarlink.org../.

Getting files.tar.gz from http://dl.allstarlink.org../.

****** Asterisk Installation ******

/etc/rc.d/astinstall.sh: line 11: ntpdate: command not found

Unpacking files.tar.gz...

Compiling Zaptel...

checking for gcc... gcc

checking for C compiler default output file name... a.out

checking whether the C compiler works... yes

checking whether we are cross compiling... no

checking for suffix of executables...

checking for suffix of object files... o

checking whether we are using the GNU C compiler... yes

checking whether gcc accepts -g... yes

checking for gcc option to accept ISO C89... none needed

checking how to run the C preprocessor... gcc -E

checking for a BSD-compatible install... /usr/bin/install -c

checking whether ln -s works... yes

checking for GNU make... make

checking for grep... /bin/grep

checking for sh... /bin/sh

checking for ln... /bin/ln

checking for wget... /usr/bin/wget

checking for grep that handles long lines and -e... (cached) /bin/grep

checking for egrep... /bin/grep -E

checking for ANSI C header files... yes

checking for sys/types.h... yes

checking for sys/stat.h... yes

checking for stdlib.h... yes

checking for string.h... yes

checking for memory.h... yes

checking for strings.h... yes

checking for inttypes.h... yes

checking for stdint.h... yes

checking for unistd.h... yes

checking for initscr in -lcurses... no

checking for initscr in -lncurses... no

checking for newtBell in -lnewt... no

checking for usb_init in -lusb... no

configure: creating ./config.status

config.status: creating build_tools/menuselect-deps

config.status: creating makeopts

config.status: creating build_tools/make_firmware_object

configure: *** Zaptel build successfully configured ***

make[1]: Entering directory `/usr/src/astsrc/zaptel/menuselect'

checking build system type... i686-pc-linux-gnu

checking host system type... i686-pc-linux-gnu

checking for gcc... gcc

checking for C compiler default output file name... a.out

checking whether the C compiler works... yes

checking whether we are cross compiling... no

checking for suffix of executables...

checking for suffix of object files... o

checking whether we are using the GNU C compiler... yes

checking whether gcc accepts -g... yes

checking for gcc option to accept ANSI C... none needed

checking for GNU make... make

checking for asprintf... yes

checking for getloadavg... yes

checking for setenv... yes

checking for strcasestr... yes

checking for strndup... yes

checking for strnlen... yes

checking for strsep... yes

checking for strtoq... yes

checking for unsetenv... yes

checking for vasprintf... yes

checking how to run the C preprocessor... gcc -E

checking for egrep... grep -E

checking for ANSI C header files... yes

checking for sys/types.h... yes

checking for sys/stat.h... yes

checking for stdlib.h... yes

checking for string.h... yes

checking for memory.h... yes

checking for strings.h... yes

checking for inttypes.h... yes

checking for stdint.h... yes

checking for unistd.h... yes

checking for initscr in -lcurses... no

checking for initscr in -lncurses... no

checking for pkg-config... No

configure: creating ./config.status

config.status: creating makeopts

config.status: creating autoconfig.h

configure: configuring in mxml

configure: running /bin/sh './configure' --prefix=/usr/local  'CC=' 'LD=' 'AR=' 'CFLAGS=' --cache-file=/dev/null --srcdir=.

checking for gcc... gcc

checking for C compiler default output file name... a.out

checking whether the C compiler works... yes

checking whether we are cross compiling... no

checking for suffix of executables...

checking for suffix of object files... o

checking whether we are using the GNU C compiler... yes

checking whether gcc accepts -g... yes

checking for gcc option to accept ANSI C... none needed

checking for g++... no

checking for c++... no

checking for gpp... no

checking for aCC... no

checking for CC... no

checking for cxx... no

checking for cc++... no

checking for cl... no

checking for FCC... no

checking for KCC... no

checking for RCC... no

checking for xlC_r... no

checking for xlC... no

checking whether we are using the GNU C++ compiler... no

checking whether g++ accepts -g... no

checking for a BSD-compatible install... /usr/bin/install -c

checking for ranlib... ranlib

checking for ar... /usr/bin/ar

checking for cp... /bin/cp

checking for ln... /bin/ln

checking for mkdir... /bin/mkdir

checking for nroff... /usr/bin/nroff

checking for rm... /bin/rm

checking for strdup... yes

checking for vsnprintf... yes

configure: creating ./config.status

config.status: creating Makefile

config.status: creating mxml.list

config.status: creating mxml.pc

config.status: creating config.h

configure: Menuselect build configuration successfully completed

make[1]: Leaving directory `/usr/src/astsrc/zaptel/menuselect'

make[1]: Entering directory `/usr/src/astsrc/zaptel/menuselect'

make[2]: Entering directory `/usr/src/astsrc/zaptel/menuselect'

gcc -g -c -D_GNU_SOURCE -Wall    -c -o menuselect.o menuselect.c

gcc -g -c -D_GNU_SOURCE -Wall    -c -o strcompat.o strcompat.c

gcc -g -c -D_GNU_SOURCE -Wall    -c -o menuselect_stub.o menuselect_stub.c

make[3]: Entering directory `/usr/src/astsrc/zaptel/menuselect/mxml'

gcc -O -Wall   -c mxml-attr.c

gcc -O -Wall   -c mxml-entity.c

gcc -O -Wall   -c mxml-file.c

gcc -O -Wall   -c mxml-index.c

gcc -O -Wall   -c mxml-node.c

gcc -O -Wall   -c mxml-search.c

gcc -O -Wall   -c mxml-set.c

gcc -O -Wall   -c mxml-private.c

gcc -O -Wall   -c mxml-string.c

/bin/rm -f libmxml.a

/usr/bin/ar crvs libmxml.a mxml-attr.o mxml-entity.o mxml-file.o mxml-index.o mxml-node.o mxml-search.o mxml-set.o mxml-private.o mxml-string.o

a - mxml-attr.o

a - mxml-entity.o

a - mxml-file.o

a - mxml-index.o

a - mxml-node.o

a - mxml-search.o

a - mxml-set.o

a - mxml-private.o

a - mxml-string.o

ranlib libmxml.a

make[3]: Leaving directory `/usr/src/astsrc/zaptel/menuselect/mxml'

gcc -o menuselect menuselect.o strcompat.o menuselect_stub.o mxml/libmxml.a mxml/libmxml.a

make[2]: Leaving directory `/usr/src/astsrc/zaptel/menuselect'

make[1]: Leaving directory `/usr/src/astsrc/zaptel/menuselect'

Generating input for menuselect ...

 

***********************************************************

  The existing menuselect.makeopts file did not specify

  that 'zttool' should not be included.  However, either some

  dependencies for this module were not found or a

  conflict exists.

 

  Either run 'make menuselect' or remove the existing

  menuselect.makeopts file to resolve this issue.

***********************************************************

 

make: *** [menuselect.makeopts] Error 255

Failure: Unable to compile Zaptel 2

Fatal error: Unable to install Asterisk!

[root@node rc.d]#

 

I dont know where to go from there..

 

Anyone care to help a bit?

 

 

---

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

---

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

---

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.