I appreciate the help Mike, I sure have a lot to learn and I’m not getting any younger, hihi.
 
Steve_WB8GRS
 
Sent: Saturday, April 30, 2016 8:34 PM
Subject: Re: [App_rpt-users] Zoiper not Transmitting
 
The default is *99 / #. Yes, you can specify something else in the rpt.conf file. However, it has to follow the rules for commands, meaning that it has to be unique and not conflict with other commands. If you don't plan to use the autopatch codes, you can "borrow" the *6xxx stuff and use *6 / #. Just be careful not to expect any other *6 sequences to be available. I'll have to look later for the right syntax or someone else can reply with.

tnx
Mike / W5JR
Alpharetta GA

On Apr 30, 2016, at 7:33 PM, ssedgwick <ssedgwick@suddenlink.net> wrote:

Thanks Mike, *99 / # worked!!! 
 
Is there a way to change *99 to something simpler, like * to transmit and # to switch back to receive?  Better yet, * to transmit and * to toggle back to receive.
 
Thanks again,
Steve_WB8GRS
 
Sent: Saturday, April 30, 2016 4:37 PM
Subject: Re: [App_rpt-users] Zoiper not Transmitting
 
The mute button is not a surrogate for PTT. If your IAX client is configured for PTT, the default to transmit is entering *99 and # to receive. If your client is configured for VOX, the mute button will keep the VOX from triggering, acting as an "allow/disallow" switch.
 
As with any VOX circuit, you pause, things unkey.

tnx
Mike / W5JR
Alpharetta GA

On Apr 30, 2016, at 4:39 PM, ssedgwick <ssedgwick@suddenlink.net> wrote:

Hi all,
 
I installed Zoiper on my Android phone and configured my node.  When I connect using Zoiper, I can hear fine on the phone, but the “mute” button won’t allow me to transmit from the phone.  I than installed Android IAXRPT on the same phone and it transmits and receives fine using the same setting that I used in Zoiper.  As a final test, I installed Zoiper on another Android phone and had the same issue, mute button won’t allow me to transmit.
 
Any idea’s?
 
Thanks,
Steve_WB8GRS
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.