Hey Ross,

I am connected to Pin 4 (Mic-Hi) of the front connector.  No mic and no control head.

boB - W5EVH


On Fri, Aug 16, 2013 at 5:12 AM, Ross Johnson <kc7rjk@comcast.net> wrote:
Hey bob
Where are you injecting the audio? There should be plenty of headroom. Is the mic still connected?
 
Ross
 
Sent: Thursday, August 15, 2013 8:12 PM
Subject: [App_rpt-users] Mastr II and URI low TX audio
 
I have a Mastr II mobile tuned up in the ham bands.  Trying to set the audio levels.  RX worked great.  Problem with TX audio, I can only get 2KHz deviation max if I set the level to 999 in app_rpt.  I am using the URI and have wired it to use the 6db amplifier on board.  Anyone else run into this problem?

boB - W5EVH


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users