It must have been a strange  routing issue because it's working fine now. Yes, they are on different ports both in the conf files and the Allstar website.

On Thursday, July 14, 2016, Bob Pyke <k6ecm1@gmail.com> wrote:
they both cannot have the same UDP port number. Make sure you reflect the correct port numbers for the nodes at allstarlink.org

Thanks,
Bob
k6ecm
73

Sent from iPad


On Jul 14, 2016, at 6:35 PM, Skyler F <electricity440@gmail.com> wrote:

I have 2 nodes under the same IP, and I am having trouble registering iax on both of them, its either or, whichever one starts asterisk first. I have properly configured the port in the iax.conf file, the rpt.conf file, and the allstar portal, but I am not able get both nodes registered with AllStar.

This problem only started happening when I configured inbound ports, 4570 UDP to one node and 4569 UDP to the other. If I turn off port forwarding, everything is fine.

One node is fine, but the other is having issues

Host                  dnsmgr  Username    Perceived             Refresh  State
67.215.233.178:4569   Y       40764       <Unregistered>             60  Request Sent
67.215.233.178:4569   Y       42622       <Unregistered>             60  Request Sent

Host                  dnsmgr  Username    Perceived             Refresh  State
67.215.233.178:4569   Y       42845       8.42.68.22:4569            60  Registered

--
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


--
Skyler Fennell
amsatnet.info
KDØWHB
electricity440@gmail.com