I have the script running and down loading the file. I had to set up a rpt
cmd to play the script and change where it saves the audio file. I have already
moved the scripts to asterisk. The only thing I have not work out is
playwxalertbg which is the script that is supposed to beacon the alert. However
asterisk does not use the files of IRLP environment, COS ACTIVE, and PTTSTATE.
On this note I was not able to get it to install on centos ACID. I have
mine running on XIPAR which is REDHAT. Centos I had trouble getting all the
libraries and deps installed.
<snip>
?Mark,
Finally after a fresh install of all the files I have the get
scripts
running. When I try to play the scripts it acts like its running and
goes
back to the root prompt and nothing come out the speakers or
transmitted
over the air. Is there something I need to change in the play
script to get
it to play.
I am using the W0ANM
scripts.
Brian
KB3ORS
27321
Brain
I ask the same question a while back and never did
get the issue resolved. Actually here everything
is working as it should which I bet is the case in
your end as well. Here When we call for the script to
play the Wx file it plays it fine but is only heard
if someone else is talking on the system and has the
Node keyed up. When they unkey or stop talking so
does the Wx script. I bet if you havn,t fixed it
ready try calling the Script and have a on going
qso on your system and see if you hear the Wx report ect.
if you have it working we would like to know what
you did.
Randy Node 27372
_______________________________________________
App_rpt-users mailing
list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
No virus found in this
message.
Checked by AVG - www.avg.com
Version: 10.0.1202 / Virus
Database: 1435/3404 - Release Date: 01/26/11